| To: | <linux-mips@linux-mips.org> |
|---|---|
| Subject: | booting 64bit kernel on RM9150 |
| From: | "Roman Mashak" <mrv@corecom.co.kr> |
| Date: | Fri, 2 Jun 2006 15:32:47 +0900 |
| Cc: | "Raj Palani" <Rajesh_Palani@pmc-sierra.com>, <Kiran_Thota@pmc-sierra.com> |
| Fl-build: | Fidolook 2002 (SL) 6.0.2800.86 - 14/6/2003 22:16:25 |
| Original-recipient: | rfc822;linux-mips@linux-mips.org |
| Sender: | linux-mips-bounce@linux-mips.org |
Hello,I succesfully compiled 2.6.12-rc3 (patched by PMC-sierra), but failed to boot it on Sequoia evaluation board. Firmware version is: PMON2000 1.9 (SEQUOIA-EB). What I understood is PMON can't deal with 64-bit images, that's why kernel image should be "objcopy'd" into ELF32 (so, result is two images: 64bit 'vmlinux' and 32bit 'vmlinux.32'). So upon booting 'vmlinux.32' - board gets hang up: Loading file: tftp://192.168.11.43/vmlinux.32 (elf) 0x80100000/2088944 + 0x80300000/774278 + 0x803bd086/139162(z) + 4044 syms-With best regards, Roman Mashak. E-mail: mrv@corecom.co.kr |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: BFD: Warning: Writing section `.text' to huge (ie negative) file offset 0xa1ffff10, zhuzhenhua |
|---|---|
| Next by Date: | where I can find a crosscompiler for BCM1255, richard |
| Previous by Thread: | Location of PCI setup code, Thomas Koeller |
| Next by Thread: | RE: booting 64bit kernel on RM9150, Raj Palani |
| Indexes: | [Date] [Thread] [Top] [All Lists] |