linux-mips
[Top] [All Lists]

[PATCH] [MIPS] create consistency in "system type" selection

To: Ralf Baechle <ralf@linux-mips.org>
Subject: [PATCH] [MIPS] create consistency in "system type" selection
From: Martin Michlmayr <tbm@cyrius.com>
Date: Tue, 9 May 2006 23:34:53 +0200
Cc: linux-mips@linux-mips.org
Original-recipient: rfc822;linux-mips@linux-mips.org
Sender: linux-mips-bounce@linux-mips.org
User-agent: Mutt/1.5.11+cvs20060330
The "system type" Kconfig options on MIPS are not consistent.  For
some platforms, only the name is listed while other entries are
prepended with "Support for".  Remove this as it doesn't make sense
when describing the "system type".  This is in line with how e.g.
ARM handles this.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>


--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -13,7 +13,7 @@ choice
        default SGI_IP22
 
 config MIPS_MTX1
-       bool "Support for 4G Systems MTX-1 board"
+       bool "4G Systems MTX-1 board"
        select DMA_NONCOHERENT
        select HW_HAS_PCI
        select SOC_AU1500
@@ -120,7 +120,7 @@ config MIPS_MIRAGE
        select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config MIPS_COBALT
-       bool "Support for Cobalt Server"
+       bool "Cobalt Server"
        select DMA_NONCOHERENT
        select HW_HAS_PCI
        select I8259
@@ -132,7 +132,7 @@ config MIPS_COBALT
        select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config MACH_DECSTATION
-       bool "Support for DECstations"
+       bool "DECstations"
        select BOOT_ELF32
        select DMA_NONCOHERENT
        select EARLY_PRINTK
@@ -158,7 +158,7 @@ config MACH_DECSTATION
          otherwise choose R3000.
 
 config MIPS_EV64120
-       bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)"
+       bool "Galileo EV64120 Evaluation board (EXPERIMENTAL)"
        depends on EXPERIMENTAL
        select DMA_NONCOHERENT
        select HW_HAS_PCI
@@ -175,7 +175,7 @@ config MIPS_EV64120
          kernel for this platform.
 
 config MIPS_EV96100
-       bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)"
+       bool "Galileo EV96100 Evaluation board (EXPERIMENTAL)"
        depends on EXPERIMENTAL
        select DMA_NONCOHERENT
        select HW_HAS_PCI
@@ -195,7 +195,7 @@ config MIPS_EV96100
          here if you wish to build a kernel for this platform.
 
 config MIPS_IVR
-       bool "Support for Globespan IVR board"
+       bool "Globespan IVR board"
        select DMA_NONCOHERENT
        select HW_HAS_PCI
        select ITE_BOARD_GEN
@@ -211,7 +211,7 @@ config MIPS_IVR
          build a kernel for this platform.
 
 config MIPS_ITE8172
-       bool "Support for ITE 8172G board"
+       bool "ITE 8172G board"
        select DMA_NONCOHERENT
        select HW_HAS_PCI
        select ITE_BOARD_GEN
@@ -228,7 +228,7 @@ config MIPS_ITE8172
          a kernel for this platform.
 
 config MACH_JAZZ
-       bool "Support for the Jazz family of machines"
+       bool "Jazz family of machines"
        select ARC
        select ARC32
        select ARCH_MAY_HAVE_PC_FDC
@@ -246,7 +246,7 @@ config MACH_JAZZ
         Olivetti M700-10 workstations.
 
 config LASAT
-       bool "Support for LASAT Networks platforms"
+       bool "LASAT Networks platforms"
        select DMA_NONCOHERENT
        select HW_HAS_PCI
        select MIPS_GT64120
@@ -258,7 +258,7 @@ config LASAT
        select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config MIPS_ATLAS
-       bool "Support for MIPS Atlas board"
+       bool "MIPS Atlas board"
        select BOOT_ELF32
        select DMA_NONCOHERENT
        select IRQ_CPU
@@ -283,7 +283,7 @@ config MIPS_ATLAS
          board.
 
 config MIPS_MALTA
-       bool "Support for MIPS Malta board"
+       bool "MIPS Malta board"
        select ARCH_MAY_HAVE_PC_FDC
        select BOOT_ELF32
        select HAVE_STD_PC_SERIAL_PORT
@@ -311,7 +311,7 @@ config MIPS_MALTA
          board.
 
 config MIPS_SEAD
-       bool "Support for MIPS SEAD board (EXPERIMENTAL)"
+       bool "MIPS SEAD board (EXPERIMENTAL)"
        depends on EXPERIMENTAL
        select IRQ_CPU
        select DMA_NONCOHERENT
@@ -328,7 +328,7 @@ config MIPS_SEAD
          board.
 
 config MIPS_SIM
-       bool 'Support for MIPS simulator (MIPSsim)'
+       bool 'MIPS simulator (MIPSsim)'
        select DMA_NONCOHERENT
        select IRQ_CPU
        select SYS_HAS_CPU_MIPS32_R1
@@ -341,7 +341,7 @@ config MIPS_SIM
          emulator.
 
 config MOMENCO_JAGUAR_ATX
-       bool "Support for Momentum Jaguar board"
+       bool "Momentum Jaguar board"
        select BOOT_ELF32
        select DMA_NONCOHERENT
        select HW_HAS_PCI
@@ -361,7 +361,7 @@ config MOMENCO_JAGUAR_ATX
          Momentum Computer <http://www.momenco.com/>.
 
 config MOMENCO_OCELOT
-       bool "Support for Momentum Ocelot board"
+       bool "Momentum Ocelot board"
        select DMA_NONCOHERENT
        select HW_HAS_PCI
        select IRQ_CPU
@@ -378,7 +378,7 @@ config MOMENCO_OCELOT
          Momentum Computer <http://www.momenco.com/>.
 
 config MOMENCO_OCELOT_3
-       bool "Support for Momentum Ocelot-3 board"
+       bool "Momentum Ocelot-3 board"
        select BOOT_ELF32
        select DMA_NONCOHERENT
        select HW_HAS_PCI
@@ -397,7 +397,7 @@ config MOMENCO_OCELOT_3
          PMC-Sierra Rm79000 core.
 
 config MOMENCO_OCELOT_C
-       bool "Support for Momentum Ocelot-C board"
+       bool "Momentum Ocelot-C board"
        select DMA_NONCOHERENT
        select HW_HAS_PCI
        select IRQ_CPU
@@ -414,7 +414,7 @@ config MOMENCO_OCELOT_C
          Momentum Computer <http://www.momenco.com/>.
 
 config MOMENCO_OCELOT_G
-       bool "Support for Momentum Ocelot-G board"
+       bool "Momentum Ocelot-G board"
        select DMA_NONCOHERENT
        select HW_HAS_PCI
        select IRQ_CPU
@@ -431,23 +431,23 @@ config MOMENCO_OCELOT_G
          Momentum Computer <http://www.momenco.com/>.
 
 config MIPS_XXS1500
-       bool "Support for MyCable XXS1500 board"
+       bool "MyCable XXS1500 board"
        select DMA_NONCOHERENT
        select SOC_AU1500
        select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config PNX8550_V2PCI
-       bool "Support for Philips PNX8550 based Viper2-PCI board"
+       bool "Philips PNX8550 based Viper2-PCI board"
        select PNX8550
        select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config PNX8550_JBS
-       bool "Support for Philips PNX8550 based JBS board"
+       bool "Philips PNX8550 based JBS board"
        select PNX8550
        select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config DDB5074
-       bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)"
+       bool "NEC DDB Vrc-5074 (EXPERIMENTAL)"
        depends on EXPERIMENTAL
        select DDB5XXX_COMMON
        select DMA_NONCOHERENT
@@ -465,7 +465,7 @@ config DDB5074
          evaluation board.
 
 config DDB5476
-       bool "Support for NEC DDB Vrc-5476"
+       bool "NEC DDB Vrc-5476"
        select DDB5XXX_COMMON
        select DMA_NONCOHERENT
        select HAVE_STD_PC_SERIAL_PORT
@@ -486,7 +486,7 @@ config DDB5476
          IDE controller, PS2 keyboard, PS2 mouse, etc.
 
 config DDB5477
-       bool "Support for NEC DDB Vrc-5477"
+       bool "NEC DDB Vrc-5477"
        select DDB5XXX_COMMON
        select DMA_NONCOHERENT
        select HW_HAS_PCI
@@ -504,10 +504,10 @@ config DDB5477
          ether port USB, AC97, PCI, etc.
 
 config MACH_VR41XX
-       bool "Support for NEC VR41XX-based machines"
+       bool "NEC VR41XX-based machines"
 
 config PMC_YOSEMITE
-       bool "Support for PMC-Sierra Yosemite eval board"
+       bool "PMC-Sierra Yosemite eval board"
        select DMA_COHERENT
        select HW_HAS_PCI
        select IRQ_CPU
@@ -524,7 +524,7 @@ config PMC_YOSEMITE
          manufactured by PMC-Sierra.
 
 config QEMU
-       bool "Support for Qemu"
+       bool "Qemu"
        select DMA_COHERENT
        select GENERIC_ISA_DMA
        select HAVE_STD_PC_SERIAL_PORT
@@ -544,7 +544,7 @@ config QEMU
          can be found at http://www.linux-mips.org/wiki/Qemu.
 
 config SGI_IP22
-       bool "Support for SGI IP22 (Indy/Indigo2)"
+       bool "SGI IP22 (Indy/Indigo2)"
        select ARC
        select ARC32
        select BOOT_ELF32
@@ -564,7 +564,7 @@ config SGI_IP22
          that runs on these, say Y here.
 
 config SGI_IP27
-       bool "Support for SGI IP27 (Origin200/2000)"
+       bool "SGI IP27 (Origin200/2000)"
        select ARC
        select ARC64
        select BOOT_ELF64
@@ -580,7 +580,7 @@ config SGI_IP27
          here.
 
 config SGI_IP32
-       bool "Support for SGI IP32 (O2) (EXPERIMENTAL)"
+       bool "SGI IP32 (O2) (EXPERIMENTAL)"
        depends on EXPERIMENTAL
        select ARC
        select ARC32
@@ -601,7 +601,7 @@ config SGI_IP32
          If you want this kernel to run on SGI O2 workstation, say Y here.
 
 config SIBYTE_BIGSUR
-       bool "Support for Sibyte BCM91480B-BigSur"
+       bool "Sibyte BCM91480B-BigSur"
        select BOOT_ELF32
        select DMA_COHERENT
        select PCI_DOMAINS
@@ -612,7 +612,7 @@ config SIBYTE_BIGSUR
        select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_SWARM
-       bool "Support for Sibyte BCM91250A-SWARM"
+       bool "Sibyte BCM91250A-SWARM"
        select BOOT_ELF32
        select DMA_COHERENT
        select SIBYTE_SB1250
@@ -623,7 +623,7 @@ config SIBYTE_SWARM
        select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_SENTOSA
-       bool "Support for Sibyte BCM91250E-Sentosa"
+       bool "Sibyte BCM91250E-Sentosa"
        depends on EXPERIMENTAL
        select BOOT_ELF32
        select DMA_COHERENT
@@ -634,7 +634,7 @@ config SIBYTE_SENTOSA
        select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_RHONE
-       bool "Support for Sibyte BCM91125E-Rhone"
+       bool "Sibyte BCM91125E-Rhone"
        depends on EXPERIMENTAL
        select BOOT_ELF32
        select DMA_COHERENT
@@ -645,7 +645,7 @@ config SIBYTE_RHONE
        select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_CARMEL
-       bool "Support for Sibyte BCM91120x-Carmel"
+       bool "Sibyte BCM91120x-Carmel"
        depends on EXPERIMENTAL
        select BOOT_ELF32
        select DMA_COHERENT
@@ -656,7 +656,7 @@ config SIBYTE_CARMEL
        select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_PTSWARM
-       bool "Support for Sibyte BCM91250PT-PTSWARM"
+       bool "Sibyte BCM91250PT-PTSWARM"
        depends on EXPERIMENTAL
        select BOOT_ELF32
        select DMA_COHERENT
@@ -668,7 +668,7 @@ config SIBYTE_PTSWARM
        select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_LITTLESUR
-       bool "Support for Sibyte BCM91250C2-LittleSur"
+       bool "Sibyte BCM91250C2-LittleSur"
        depends on EXPERIMENTAL
        select BOOT_ELF32
        select DMA_COHERENT
@@ -680,7 +680,7 @@ config SIBYTE_LITTLESUR
        select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_CRHINE
-       bool "Support for Sibyte BCM91120C-CRhine"
+       bool "Sibyte BCM91120C-CRhine"
        depends on EXPERIMENTAL
        select BOOT_ELF32
        select DMA_COHERENT
@@ -691,7 +691,7 @@ config SIBYTE_CRHINE
        select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_CRHONE
-       bool "Support for Sibyte BCM91125C-CRhone"
+       bool "Sibyte BCM91125C-CRhone"
        depends on EXPERIMENTAL
        select BOOT_ELF32
        select DMA_COHERENT
@@ -703,7 +703,7 @@ config SIBYTE_CRHONE
        select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SNI_RM200_PCI
-       bool "Support for SNI RM200 PCI"
+       bool "SNI RM200 PCI"
        select ARC
        select ARC32
        select ARCH_MAY_HAVE_PC_FDC
@@ -729,7 +729,7 @@ config SNI_RM200_PCI
          support this machine type.
 
 config TOSHIBA_JMR3927
-       bool "Support for Toshiba JMR-TX3927 board"
+       bool "Toshiba JMR-TX3927 board"
        select DMA_NONCOHERENT
        select HW_HAS_PCI
        select MIPS_TX3927
@@ -740,7 +740,7 @@ config TOSHIBA_JMR3927
        select TOSHIBA_BOARDS
 
 config TOSHIBA_RBTX4927
-       bool "Support for Toshiba TBTX49[23]7 board"
+       bool "Toshiba TBTX49[23]7 board"
        select DMA_NONCOHERENT
        select HAS_TXX9_SERIAL
        select HW_HAS_PCI
@@ -757,7 +757,7 @@ config TOSHIBA_RBTX4927
          support this machine type
 
 config TOSHIBA_RBTX4938
-       bool "Support for Toshiba RBTX4938 board"
+       bool "Toshiba RBTX4938 board"
        select HAVE_STD_PC_SERIAL_PORT
        select DMA_NONCOHERENT
        select GENERIC_ISA_DMA

-- 
Martin Michlmayr
http://www.cyrius.com/

<Prev in Thread] Current Thread [Next in Thread>