linux-mips
[Top] [All Lists]

Re: [PATCH] improve readability of arch/mips/Kconfig

To: linux-mips@linux-mips.org
Subject: Re: [PATCH] improve readability of arch/mips/Kconfig
From: Shane McDonald <mcdonald@pmc-sierra.com>
Date: Sat, 6 May 2006 15:47:53 -0600
Original-recipient: rfc822;linux-mips@linux-mips.org
Sender: linux-mips-bounce@linux-mips.org
> > I'll try this again ... I think I've got the corrupt patch 
> issue resolved.
> 
> Nope, still all tabs converted to spaces.
> 
>   Ralf

Oops, heh heh.  One last time before I crawl back under my rock...

From: Shane McDonald <shane_mcdonald@pmc-sierra.com>

The wording of the help entries for CPU_MIPS32_R1, CPU_MIPS32_R2,
CPU_MIPS64_R1, and CPU_MIPS64_R2 was confusing.
The entries have been slightly reworded to improve the readability.

Signed-off-by: Shane McDonald <shane_mcdonald@pmc-sierra.com>

---

diff -uprN a/arch/mips/Kconfig b/arch/mips/Kconfig
--- a/arch/mips/Kconfig 2006-05-04 16:25:32.000000000 -0600
+++ b/arch/mips/Kconfig 2006-05-04 16:50:08.000000000 -0600
@@ -1075,10 +1075,10 @@ config CPU_MIPS32_R1
          Choose this option to build a kernel for release 1 or later of the
          MIPS32 architecture.  Most modern embedded systems with a 32-bit
          MIPS processor are based on a MIPS32 processor.  If you know the
-         specific type of processor in your system, choose those that one
-         otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
-         Release 2 of the MIPS32 architecture is available since several
-         years so chances are you even have a MIPS32 Release 2 processor
+         specific type of processor in your system, choose that one;
+         otherwise, CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
+         Release 2 of the MIPS32 architecture has been available for
+         several years so chances are you have a MIPS32 Release 2 processor
          in which case you should choose CPU_MIPS32_R2 instead for better
          performance.
 
@@ -1093,8 +1093,8 @@ config CPU_MIPS32_R2
          Choose this option to build a kernel for release 2 or later of the
          MIPS32 architecture.  Most modern embedded systems with a 32-bit
          MIPS processor are based on a MIPS32 processor.  If you know the
-         specific type of processor in your system, choose those that one
-         otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
+         specific type of processor in your system, choose that one;
+         otherwise, CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
 
 config CPU_MIPS64_R1
        bool "MIPS64 Release 1"
@@ -1108,10 +1108,10 @@ config CPU_MIPS64_R1
          Choose this option to build a kernel for release 1 or later of the
          MIPS64 architecture.  Many modern embedded systems with a 64-bit
          MIPS processor are based on a MIPS64 processor.  If you know the
-         specific type of processor in your system, choose those that one
-         otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
-         Release 2 of the MIPS64 architecture is available since several
-         years so chances are you even have a MIPS64 Release 2 processor
+         specific type of processor in your system, choose that one;
+         otherwise, CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
+         Release 2 of the MIPS64 architecture has been available for
+         several years so chances are you have a MIPS64 Release 2 processor
          in which case you should choose CPU_MIPS64_R2 instead for better
          performance.
 
@@ -1127,8 +1127,8 @@ config CPU_MIPS64_R2
          Choose this option to build a kernel for release 2 or later of the
          MIPS64 architecture.  Many modern embedded systems with a 64-bit
          MIPS processor are based on a MIPS64 processor.  If you know the
-         specific type of processor in your system, choose those that one
-         otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
+         specific type of processor in your system, choose that one;
+         otherwise, CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
 
 config CPU_R3000
        bool "R3000"

<Prev in Thread] Current Thread [Next in Thread>