linux-mips
[Top] [All Lists]

Linux-2.6.16 on DB1100

To: linux-mips@linux-mips.org
Subject: Linux-2.6.16 on DB1100
From: "safiudeen Ts" <safiudeen@hotmail.com>
Date: Thu, 04 May 2006 06:31:08 +0000
Original-recipient: rfc822;linux-mips@linux-mips.org
Sender: linux-mips-bounce@linux-mips.org
Hi all,
I am testing linux-2.6.16 on DB1100 board.I downloded the kernel from www.linux-mips.org and cross compiled with configaration that suit for Db1100.
I used following command to get vmlinux.srec

$ make vmlinux.srec

and copyed it to /tftpboot/

DB1100 board load the kernel image through nfs using yamon boot loader.

when we reset the board, it starts the yamon and load the kernel from nfs server after that it hang threre. There are no any kernel messages comming to minicom ( minicom is running in PC with serial port is connected to the db1100 boards serial port 0)

Followings are the minicom output I recived
-----------------------------------------------------------


About to load tftp://192.168.0.3//tftpboot/vmlinux.srec
Press Ctrl-C to break
...............................................................................
..................................................................................
................................................................................

Start = 0x8034f000, range = ( 0x80100000,0x8036e084 )

-----------------------------------------------------------

Please can anyone help me to short it out this problem?

Thanx
Safiudeen

_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/


<Prev in Thread] Current Thread [Next in Thread>