linux-mips
[Top] [All Lists]

Re: How can I use DBAu1550 UART3 instead of UART0?

To: "Charles C.K.Lai" <cklai@itri.org.tw>
Subject: Re: How can I use DBAu1550 UART3 instead of UART0?
From: Freddy Spierenburg <freddy@dusktilldawn.nl>
Date: Wed, 3 May 2006 09:16:08 +0200
Cc: linux-mips@linux-mips.org
In-reply-to: <00fa01c66e5f$eb0af470$8873608c@11088002601>
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <00fa01c66e5f$eb0af470$8873608c@11088002601>
Sender: linux-mips-bounce@linux-mips.org
User-agent: Mutt/1.5.11+cvs20060403
Hi Charles,

On Wed, May 03, 2006 at 11:16:01AM +0800, Charles C.K.Lai wrote:
> I have a AMD DBAu1550 Development board, 
> if I have to use the uart port 3 instead of uart port 0, 
> what can I do? 
Using /dev/ttyS3 instead of /dev/ttyS0 might be the thing to do.
Do you see both ports get detected during boot ($ dmesg)? That
should give you a clue.

-- 
$ cat ~/.signature
Freddy Spierenburg <freddy@dusktilldawn.nl>  http://freddy.snarl.nl/
GnuPG: 0x7941D1E1=C948 5851 26D2 FA5C 39F1  E588 6F17 FD5D 7941 D1E1
$ # Please read http://www.ietf.org/rfc/rfc2015.txt before complain!

Attachment: signature.asc
Description: Digital signature

<Prev in Thread] Current Thread [Next in Thread>