Is this driver known to work with 64-bit kernels (specifically: 64-bit
DMA addresses)? It sounds like that might be the problem.
> -----Original Message-----
> From: Martin Michlmayr [mailto:firstname.lastname@example.org]
> Sent: Tuesday, February 28, 2006 2:13 PM
> To: Mark E Mason
> Cc: email@example.com
> Subject: Re: BCM91x80A/B PCI DMA problems
> * Mark E Mason <firstname.lastname@example.org> [2006-02-28 13:53]:
> > Is this a 32-bit, or 64-bit kernel? If 64-bit, do you have
> more than
> > 1G of DRAM installed in the system (DRAM above 1G is accessed at
> > >32-bit physical addresses).
> Erm, I have 2 GB of RAM and used a 64-bit kernel. Using a
> 32-bit kernel works.
> > Are you using CFE 1.2.5? The PCI interrupt assignments in earlier
> > versions of CFE were not correct.
> Martin Michlmayr