linux-mips
[Top] [All Lists]

Au1200 IDE Interface (interrupt) error

To: linux-mips@linux-mips.org
Subject: Au1200 IDE Interface (interrupt) error
From: Youngduk Goo <ydgoo9@gmail.com>
Date: Tue, 24 Jan 2006 13:21:42 +0900
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; b=KjzYDfxSPoRrRfSn5cYptg8BoDz+cfbKxrpg9S9aj19eBteTViBSH9FPAtMKI/L6CJT42BRcODroHoI2CvR5hwsDH2g9ffGAiDgLWKzGdSCnWoa0qHSSwwJ4QdVKRn15+XOwplgSLmPyK+hdEe0GjzESSybAvQuiQ1Xbk7WxGvY=
Original-recipient: rfc822;linux-mips@linux-mips.org
Sender: linux-mips-bounce@linux-mips.org
I got the below error message.
=======================================
Au1xxx IDE(builtin) configured for PIO+DDMA(offload)
hda: FUJITSU MHT2020AT, ATA DISK drive
hda: setting Au1XXX IDE to PIO mode4
ide0 at 0xb8800000-0xb8800007,0xb88001c0 on irq 64
hda: max request size: 64KiB
hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
hda: 39070080 sectors (20003 MB) w/2048KiB Cache, CHS=38760/16/63
hda: lost interrupt
hda: lost interrupt
 hda:<4>hda: lost interrupt
 hda1 hda2
hda: lost interrupt
==========================================
Our board is based on the Au1200 and we use the Compact Flash as a HDD.
It looks the hdd identified but the interrupt config is bad.
The base address looks fine but don't understand
why the irq number is 64.

I am not sure how can I set this. Please help me,
Thanks,.

<Prev in Thread] Current Thread [Next in Thread>
  • Au1200 IDE Interface (interrupt) error, Youngduk Goo <=