linux-mips
[Top] [All Lists]

RE: Building the kernel for a Broadcom SB1

To: "Martin Michlmayr" <tbm@cyrius.com>
Subject: RE: Building the kernel for a Broadcom SB1
From: "Mark E Mason" <mark.e.mason@broadcom.com>
Date: Mon, 23 Jan 2006 12:53:00 -0800
Cc: linux-mips@linux-mips.org
Original-recipient: rfc822;linux-mips@linux-mips.org
Sender: linux-mips-bounce@linux-mips.org
Thread-index: AcYgHMNKcIfD5ibBSCu20YKn9L33LQAQhgxA
Thread-topic: Building the kernel for a Broadcom SB1
Hello,

Yes....

The original email from me with the patch was posted on 9/15, the patch
was applied to git (by way of Andy) around early October.

HTH,
Mark

-----Original Message-----
From: Martin Michlmayr [mailto:tbm@cyrius.com] 
Sent: Monday, January 23, 2006 4:58 AM
To: Mark E Mason
Cc: linux-mips@linux-mips.org
Subject: Re: Building the kernel for a Broadcom SB1

* Martin Michlmayr <tbm@cyrius.com> [2006-01-16 16:05]:
> > >Anyway, there are a few symbols undefined, which is >causing
> > problems. First off the bat is TO_PHYS_MASK.  >There is no set of 
> > definitions in >include/asm-mips/addrspace.h for the SB1 processor.
> Can this patch be applied?

Actually, no, SB1 is defined in addrspace.h already and this leads to a
redefinition.  The values that would've been used with your patch and
the current values are slightly different though; maybe you can check
that.  Current git works though.
--
Martin Michlmayr
http://www.cyrius.com/



<Prev in Thread] Current Thread [Next in Thread>