I repated the build process with the kernel versions 2.4.25 and 2.4.27
and I got the same errors. I downloaded these kernels from
linux-mips.org through CVS.
Can someone please explain me the mistake that I seem to be
committing? I'm a newbie to Linux/MIPS arena and so find these errors
very confusing.
Thanks,
Shireesh
> On 12/16/05, Shireesh Annam <annamshr@gmail.com> wrote:
> > I'm now using the SDE-Linux 5.03.06 for the big-endian target. I
> > started the 2.4.22 kernel build process, but soon I get the following
> > compile error.
> >
> > **********
> > make[2]: Entering directory `/root/linux/arch/mips/mm'
> > mips-linux-gcc -D__KERNEL__ -I/root/linux/include -Wall
> > -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing
> > -fno-common -fomit-frame-pointer -I /root/linux/include/asm/gcc -G 0
> > -mno-abicalls -fno-pic -pipe -mabi=32 -mcpu=r4600 -mips2 -Wa,--trap
> > -nostdinc -iwithprefix include -DKBUILD_BASENAME=sc_ip22 -c -o
> > sc-ip22.o sc-ip22.c
> > {standard input}: Assembler messages:
> > {standard input}:126: Error: Number (0x9000000080000000) larger than 32 bits
> > {standard input}:148: Error: Number (0x9000000080000000) larger than 32 bits
> > {standard input}:168: Error: Number (0x9000000080000000) larger than 32 bits
> > make[2]: *** [sc-ip22.o] Error 1
> > make[2]: Leaving directory `/root/linux/arch/mips/mm'
> > make[1]: *** [first_rule] Error 2
> > make[1]: Leaving directory `/root/linux/arch/mips/mm'
> > make: *** [_dir_arch/mips/mm] Error 2
> >
> > **********
> >
> > I'm not able to understand these error messages. Could someone throiw
> > some light on this issue? Is this because of the toolchain that I'm
> > using for building the kernel?
> >
> > Thanks,
> > Shireesh
> >
> > On 12/15/05, Ralf Baechle <ralf@linux-mips.org> wrote:
> > > You're trying to build a stoneage kernel with a much newer compiler -
> > > SDE 6 uses gcc 3.4 - which doesn't work. Use an older compiler such
> > > as gcc <= 3.3.x. SDE 5.x contains gcc 2.96 btw.
> > >
> > > Ralf
> > >
> >
>
|