where to set the BEV to normal of status in kernel source?

To:	linux-mips@linux-mips.org
Subject:	where to set the BEV to normal of status in kernel source?
From:	zhuzhenhua <zzh.hust@gmail.com>
Date:	Fri, 2 Dec 2005 15:12:35 +0800
Domainkey-signature:	a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; b=d0ntXKGDNs96c1K3P3C3NbsChfQz9FhL2+3NW+RihgoBL3X85Tqg/7QsSpWSsBG1CtdsnmalRj65+M2kFyanWNh5miud16Rz9WPT3s/wFF9dkbe+4m8/CvAiqGsQAM07Gt0cS5JJqCCoC6kfS/QP+VPXEXzKswbqINhglA3Afdo=
Original-recipient:	rfc822;linux-mips@linux-mips.org
Sender:	linux-mips-bounce@linux-mips.org

i don't find it in load_mmu(), who can point out for me?
thanks!
is that must be set in bootloader?


Best regards


zhuzhenhua

<Prev in Thread]	Current Thread	[Next in Thread>
where to set the BEV to normal of status in kernel source?, zhuzhenhua <=

Previous by Date:	get an usleep() with less than 20ms on 2.4.27, Conil.Christophe
Next by Date:	Re : where to set the BEV to normal of status in kernel source?, Florian DELIZY
Previous by Thread:	get an usleep() with less than 20ms on 2.4.27, Conil.Christophe
Next by Thread:	Re : where to set the BEV to normal of status in kernel source?, Florian DELIZY
Indexes:	[Date] [Thread] [Top] [All Lists]