linux-mips
[Top] [All Lists]

[PATCH] Fix BSCR accesses

To: linux-mips@linux-mips.org
Subject: [PATCH] Fix BSCR accesses
From: "Jordan Crouse" <jordan.crouse@amd.com>
Date: Tue, 22 Nov 2005 14:02:58 -0700
Cc: ralf@linux-mips.org
Original-recipient: rfc822;linux-mips@linux-mips.org
Sender: linux-mips-bounce@linux-mips.org
User-agent: Mutt/1.5.11
Last one from Sergei:

Fix BSCR accesses in the board setup code.
---

 arch/mips/au1000/db1x00/board_setup.c |    7 +++----
 1 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/mips/au1000/db1x00/board_setup.c 
b/arch/mips/au1000/db1x00/board_setup.c
index ac05ba0..f00ec3b 100644
--- a/arch/mips/au1000/db1x00/board_setup.c
+++ b/arch/mips/au1000/db1x00/board_setup.c
@@ -45,13 +45,12 @@
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-db1x00/db1x00.h>
 
-/* not correct for db1550 */
-static BCSR * const bcsr = (BCSR *)0xAE000000;
+static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
 
 void board_reset (void)
 {
        /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
-       au_writel(0x00000000, 0xAE00001C);
+       bcsr->swreset = 0x0000;
 }
 
 void __init board_setup(void)
@@ -75,7 +74,7 @@ void __init board_setup(void)
        bcsr->resets |= BCSR_RESETS_IRDA_MODE_OFF;
        au_sync();
 #endif
-       au_writel(0, 0xAE000010); /* turn off pcmcia power */
+       bcsr->pcmcia = 0x0000; /* turn off PCMCIA power */
 
 #ifdef CONFIG_MIPS_MIRAGE
        /* enable GPIO[31:0] inputs */


<Prev in Thread] Current Thread [Next in Thread>
  • [PATCH] Fix BSCR accesses, Jordan Crouse <=