linux-mips
[Top] [All Lists]

Re: Booting with NFS fails

To: Nguyen Thanh Binh <n_tbinh@yahoo.com>, linux-mips@linux-mips.org
Subject: Re: Booting with NFS fails
From: Manish Lachwani <m_lachwani@yahoo.com>
Date: Sat, 5 Nov 2005 01:08:52 -0800 (PST)
Cc: mlachwani@mvista.com
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:Received:Date:From:Subject:To:Cc:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=NcNDkKSeuO+yGsnfhyQI0Ju77DUIGl6fkNLzMgx1IJKZ6WvTVdwYy4J7gtsB/Rg9+NfcvZH6Bys81CcE6WIu4J3R6LusL3ZPzZsnHtJhkG7jhzC43R7k9xANb4tnlwsODFjgQd4SyBN/tRkI7J2z0MqkkIMMshRDLsH8jBVAp48= ;
In-reply-to: <20051105071303.60438.qmail@web30705.mail.mud.yahoo.com>
Original-recipient: rfc822;linux-mips@linux-mips.org
Sender: linux-mips-bounce@linux-mips.org
Can you please post the complete boot log?

Thanks
Manish Lachwani

--- Nguyen Thanh Binh <n_tbinh@yahoo.com> wrote:

> Hello all,
> 
> I have installed Red Hat Enterprise 3 on the host
> (x86) and MontaVista Linux (previewkit) on the
> target
> (memec virtex-4 Fx12 LC board). When booting the
> target using NFS from the host, the following error
> appeared:
> 
>    eth0: Link carrier lost.
>    eth0: Could not read PHY control register; error
> 1003
>    eth0: Terminating link monitoring.
> 
> It is very strange, because ethernet does not work
> as
> the error shows but I can ping the target from the
> host with the IP got with DHCP.
> 
> Your help or experience would be appreciated.
> 
> Thank you.
> 
> Nguyen Binh
> 
> 
> 
>               
>
___________________________________________________________
> 
> How much free photo storage do you get? Store your
> holiday 
> snaps for FREE with Yahoo! Photos
> http://uk.photos.yahoo.com
> 
> 


<Prev in Thread] Current Thread [Next in Thread>