Howto Boot from Flash with the Alchemy AU1100

linux-mips

To:	linux-mips@linux-mips.org
Subject:	Howto Boot from Flash with the Alchemy AU1100
From:	Robert Bon <robo@dare.nl>
Date:	Mon, 05 Sep 2005 10:57:53 +0200
Original-recipient:	rfc822;linux-mips@linux-mips.org
Sender:	linux-mips-bounce@linux-mips.org
User-agent:	Debian Thunderbird 1.0.2 (X11/20050602)

Hello,

We are running linux kernel 2.6.12 on a AMD-Alchemy DB1100 evaluationboard, with processor AU1100.

De kernel file is a Srecord which is programmed (with the bootloaderYAMON load command) in to RAM, starting at address 0x80100000.

We want to store in the onboard flash.

How can we do this?

Thanks Robert.

<Prev in Thread]	Current Thread	[Next in Thread>
Howto Boot from Flash with the Alchemy AU1100, Robert Bon <= Re: Howto Boot from Flash with the Alchemy AU1100, Jørg Ulrich Hansen

Previous by Date:	Re: possible serial driver fixup for au1x00 in 2.6?, Matej Kupljen
Next by Date:	Re: a patch for generic MIPS RTC, Maciej W. Rozycki
Previous by Thread:	Re: possible serial driver fixup for au1x00 in 2.6?, Matej Kupljen
Next by Thread:	Re: Howto Boot from Flash with the Alchemy AU1100, Jørg Ulrich Hansen
Indexes:	[Date] [Thread] [Top] [All Lists]