linux-mips
[Top] [All Lists]

Re: possible serial driver fixup for au1x00 in 2.6?

To: ppopov@embeddedalley.com
Subject: Re: possible serial driver fixup for au1x00 in 2.6?
From: rolf liu <rolfliu@gmail.com>
Date: Tue, 5 Jul 2005 12:40:54 -0700
Cc: "linux-mips@linux-mips.org" <linux-mips@linux-mips.org>
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:reply-to:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=lLpxi9VtoBbJkKxgdzsnNmwTYS1X0TuCbPTdwm8PRQOmLz9P3Y26bgm06+5QdVg6YjfQ7Hz/IzM8VWRvxovLghlEsptekPjL2z9Cri3vLs5uGTKAGtJuIt8J0LXtsqhBl1iNZqiUhy4cvZyOACHi9J5CTSRpE8y00ZJD1H/KeK0=
In-reply-to: <1120266383.5987.46.camel@localhost.localdomain>
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <2db32b720507011756247735d6@mail.gmail.com> <1120266383.5987.46.camel@localhost.localdomain>
Reply-to: rolf liu <rolfliu@gmail.com>
Sender: linux-mips-bounce@linux-mips.org
Pete,
To try if 8250.c can work under db1550/linux 2.6.12, I turn off the
au1x00_uart.c config and just compiled in the 8250 support. When I
boot the kernel, nothing comes up through the console, which should be
provided by 8250 support, by 8250_early.c?

Any idea?

On 7/1/05, Pete Popov <ppopov@embeddedalley.com> wrote:
> On Fri, 2005-07-01 at 17:56 -0700, rolf liu wrote:
> > Basically, au1x00_uart.c is doing the same thing as 8250.c.
> 
> Basically.
> 
> > If I want
> > to add extra serial port support by 8250.c. There could be some
> > problem. Any idea?
> 
> Don't know, haven't tried it. In general, the au1x00 serial driver needs
> to be rewritten.
> 
> Pete
> 
>

<Prev in Thread] Current Thread [Next in Thread>