Re: 2.6.12 does not read MAC address

[Arianna Arona <arianna@dsi.unimi.it>]

On Tuesday 05 July 2005 16:57, Ilya A. Volynets-Evenbakh wrote:
>
> No you are wrong. Forcing MAC address works just fine. At least it does
> so here.
> You just have to force it to correct value (i.e. the one origin was
> using when it was sending bootp/tftp packets.

I've forced it using: ifconfig eth0 hw ether 08:00:69:0d:16:00,
where 08:00:69:0d:16:00 is MAC address.
After that ifconfig command has right values, but no bits are transmitted.
The one I've used is the right way?

A.



-- 
Arianna Arona
Servizi Informatici
Dipartimento di Scienze dell'Informazione
Via Comelico 39
20135 Milano