linux-mips
[Top] [All Lists]

RE: I built a mipsel-linux toolchain, but it doesn't work

To: <sjhill@realitydiluted.com>, "David Daney" <ddaney@avtrex.com>
Subject: RE: I built a mipsel-linux toolchain, but it doesn't work
From: "Singh, Ajay" <ajaysingh@ti.com>
Date: Sat, 2 Jul 2005 14:10:48 +0530
Cc: "moreau francis" <francis_moreau2000@yahoo.fr>, "zhan rongkai" <zhanrk@gmail.com>, <linux-mips@linux-mips.org>
Original-recipient: rfc822;linux-mips@linux-mips.org
Sender: linux-mips-bounce@linux-mips.org
Thread-index: AcV+ViWjSXBS2K9XQPWdR9qPsq6FCwAi2j7w
Thread-topic: I built a mipsel-linux toolchain, but it doesn't work
We are using uClibc-0.9.27 for MIPS target. Can you point out the issues
with uClibc-0.9.27 ??

~Ajay.

-----Original Message-----
From: linux-mips-bounce@linux-mips.org
[mailto:linux-mips-bounce@linux-mips.org] On Behalf Of
sjhill@realitydiluted.com
Sent: Friday, July 01, 2005 8:30 PM
To: David Daney
Cc: moreau francis; zhan rongkai; linux-mips@linux-mips.org
Subject: Re: I built a mipsel-linux toolchain, but it doesn't work

> moreau francis wrote:
> > Could you develop please ? What kind of config/hack does Buildroot 
> > to be able to use GCC with uClibc ?
> > 
> 
> It is quite complicated, but you can find a summary on this web page:
> 
> http://www.google.com/search?q=uclibc+buildroot
> 
Here is the page for it:

   http://buildroot.uclibc.org/

The mipsel target is supported and will build for your needs. Do not use
uClibc-0.9.27 when you configure your buildroot system. Use the latest
uClibc snapshot. There are issues with uClibc-0.9.27 with MIPS targets.

-Steve


<Prev in Thread] Current Thread [Next in Thread>