linux-mips
[Top] [All Lists]

Re: which 2.6 kernel can be run on db1550?

To: unlisted-recipients:; (no To-header on input)
Subject: Re: which 2.6 kernel can be run on db1550?
From: rolf liu <rolfliu@gmail.com>
Date: Thu, 23 Jun 2005 15:04:26 -0700
Cc: linux-mips@linux-mips.org
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:reply-to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=Ajii0zgGSRA0UQW6lmQCXFdhbY9InH7n5WkT3tpSCFdS41TAq2uSAnw/41bKdAKKj84BUSxmaSDasVqmBzbbqfFDeJNt/ROTaN+y+jpcIuhc8r+qsSEHTyH8JGXjDnXh//MxkqDrmKlY2ZDGg8i6A2fXp4Mj0Joy4Y9TyAt7+0w=
In-reply-to: <ecb4efd1050623144816f7f528@mail.gmail.com>
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <2db32b72050623133731f7b098@mail.gmail.com> <ecb4efd1050623144816f7f528@mail.gmail.com>
Reply-to: rolf liu <rolfliu@gmail.com>
Sender: linux-mips-bounce@linux-mips.org
Thanks very much for the information.

SDE is the toolchain from mips, which is based on gcc 2.96.

I'll try 2.6.11 then


On 6/23/05, Clem Taylor <clem.taylor@gmail.com> wrote:
> On 6/23/05, rolf liu <rolfliu@gmail.com> wrote:
> > I just compiled 2.4.31 and run that on db1550. It works through a NFS
> > root file system. I am thinking of running of 2.6 on db1550.
> 
> I haven't switched over to 2.6.12, but I'm running 2.6.11 (checked out
> from linux-mips on 2005.03.18) on a Au1550 based board. When I was
> porting to my hardware, the default kernel worked just fine on the
> DBAu1550. I'm using gcc 3.4.3 and 2.15.94.0.2.2 bintools.
> 
> > Which one can be compiled by SDE and run this box?
> 
> I'm not sure what SDE is. I used buildroot to compile my toolchain and
> make my root image.
> 
> > I tried 2.6.12 and tried 2.6.12-rc6, but got no luck. They just don't 
> > compile.
> 
> I haven't had a chance to try 2.6.12 yet.
> 
>                                --Clem
>

<Prev in Thread] Current Thread [Next in Thread>