On Mon, 23 May 2005 18:45:01 +0400
Dmitriy Tochansky <toch@dfpost.ru> wrote:
> Yenta: CardBus bridge found at 0000:00:11.0 [e4bf:2000]
>
> yenta 0000:00:11.0: Preassigned resource 0 busy, reconfiguring...
>
> yenta 0000:00:11.0: Preassigned resource 1 busy, reconfiguring...
>
> Yenta: Enabling burst memory read transactions
>
> Yenta: Using CSCINT to route CSC interrupts to PCI
>
> Yenta: Routing CardBus interrupts to PCI
>
> Yenta TI: socket 0000:00:11.0, mfunc 0x0fc01d02, devctl 0x66
>
> drivers/pcmcia/ti113x.h pci_irq_status = 0
>
> Yenta TI: socket 0000:00:11.0 probing PCI interrupt failed, trying to fix
>
> Yenta TI: socket 0000:00:11.0 falling back to parallel PCI interrupts
>
> Yenta TI: socket 0000:00:11.0 no PCI interrupts. Fish. Please report.
>
> CPU 0 Unable to handle kernel paging request at virtual address 00000004, epc
> =0
> ....
Hm... Bus 5?
Linux Kernel Card Services
options: [pci] [cardbus]
PCI: Bus 1, cardbus bridge: 0000:00:11.0
IO window: 00001000-00001fff
IO window: 00002000-00002fff
PREFETCH window: 40000000-41ffffff
MEM window: 42000000-43ffffff
PCI: Bus 5, cardbus bridge: 0000:00:11.1
IO window: 00003000-00003fff
IO window: 00004000-00004fff
PREFETCH window: 44000000-45ffffff
MEM window: 46000000-47ffffff
PCI: Enabling device 0000:00:11.0 (0000 -> 0002)
PCI: Enabling device 0000:00:11.1 (0000 -> 0002)
--
Dmitriy Tochansky
toch@dfpost.ru
JID: dtoch@jabber.ru
|