linux-mips
[Top] [All Lists]

Re: dbau1200 ethernet driver?

To: "Ruslan V.Pisarev" <jerry@izmiran.rssi.ru>
Subject: Re: dbau1200 ethernet driver?
From: Pete Popov <ppopov@embeddedalley.com>
Date: Fri, 06 May 2005 08:46:40 -0700
Cc: "'linux-mips@linux-mips.org'" <linux-mips@linux-mips.org>
In-reply-to: <261758805.20050506155322@izmiran.rssi.ru>
Organization: Embedded Alley Solutions, Inc
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <261758805.20050506155322@izmiran.rssi.ru>
Reply-to: ppopov@embeddedalley.com
Sender: linux-mips-bounce@linux-mips.org
On Fri, 2005-05-06 at 15:53 +0300, Ruslan V.Pisarev wrote:
>   Hi!
> 
>  I compiled last 2.6 kernel (2-3 weeks ago from cvs@linux-mips) and
> trying to start it on DBAu1200 development board. First problem I
> discovered with "nfsroot" configuration - is that kernel cannot find
> network interface at boot-time.
>  There is a smc91c111 network chip on board, so my question is - what
> driver is suitable with him?

The smc91x.c driver. However, I don't remember if that driver was
tested.  The board was tested with a different smc driver which I
couldn't push in the tree because it was old and would conflict with the
smc91x.c.

>  Is it "MIPS AU1000 Ethernet support"
> which fails to compile with "error: `NUM_ETH_INTERFACES' undeclared"
> (and it must be?) or something different? It seems that I have enabled
> all other options for ethernet functionality.

Well, that's a different driver.



Pete

> 
> 
> the part of boot log is:
> 
> loop: loaded (max 8 devices)
> nbd: registered device at major 43
> NET: Registered protocol family 2
> IP: routing cache hash table of 2048 buckets, 16Kbytes
> TCP established hash table entries: 16384 (order: 5, 131072 bytes)
> TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
> TCP: Hash tables configured (established 16384 bind 16384)
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> IP-Config: No network devices available.
> Looking up port of RPC 100003/2 on 192.168.0.30
> RPC: sendmsg returned error 128
> portmap: RPC call returned error 128
> Root-NFS: Unable to get nfsd port number from server, using default
> Looking up port of RPC 100005/1 on 192.168.0.30
> RPC: sendmsg returned error 128
> portmap: RPC call returned error 128
> Root-NFS: Unable to get mountd port number from server, using default
> RPC: sendmsg returned error 128
> mount: RPC call returned error 128
> 
> 
>    ()_()
> --( °,° )---[21398845]-[jerry¤wicomtechnologies.com]-
>   (") (")                 -<The Bat! 3.0.1.33>- -<06/05/2005 15:35>-
> 
> 


<Prev in Thread] Current Thread [Next in Thread>