In ip22-setup.c the checks for serial/graphics console logic does
not check if ARCS console=g but the machine is using serial console, as
it does if no keyboard is attached.
This patch adds a check if ConsoleOut is serial. There might also be
support for other graphics than Newport soon...
Index: arch/mips/sgi-ip22/ip22-setup.c
===================================================================
RCS file: /home/cvs/linux/arch/mips/sgi-ip22/ip22-setup.c,v
retrieving revision 1.44
diff -u -r1.44 ip22-setup.c
--- arch/mips/sgi-ip22/ip22-setup.c 10 Dec 2004 13:31:42 -0000 1.44
+++ arch/mips/sgi-ip22/ip22-setup.c 14 Feb 2005 13:57:33 -0000
@@ -56,6 +56,7 @@
static int __init ip22_setup(void)
{
char *ctype;
+ char *cserial;
board_be_init = ip22_be_init;
ip22_time_init();
@@ -81,9 +82,14 @@
/* ARCS console environment variable is set to "g?" for
* graphics console, it is set to "d" for the first serial
* line and "d2" for the second serial line.
+ *
+ * Need to check if the case is 'g' but no keyboard:
+ * (ConsoleIn/Out = serial )
*/
ctype = ArcGetEnvironmentVariable("console");
- if (ctype && *ctype == 'd') {
+ cserial = ArcGetEnvironmentVariable("ConsoleOut");
+
+ if ( (ctype && *ctype == 'd') || (cserial && *cserial == 's')) {
static char options[8];
char *baud = ArcGetEnvironmentVariable("dbaud");
if (baud)
@@ -91,7 +97,7 @@
add_preferred_console("ttyS", *(ctype + 1) == '2' ? 1 : 0,
baud ? options : NULL);
} else if (!ctype || *ctype != 'g') {
- /* Use ARC if we don't want serial ('d') or Newport ('g'). */
+ /* Use ARC if we don't want serial ('d') or Graphics ('g'). */
prom_flags |= PROM_FLAG_USE_AS_CONSOLE;
add_preferred_console("arc", 0, NULL);
}
--
Kaj-Michael Lang, Turku, Finland
milang@tal.org http://www.tal.org/
|