linux-mips
[Top] [All Lists]

Re: Problem with HIGHMEM implementation for 32 bit mips-el port

To: Rishabh@soc-soft.com, linux-mips@linux-mips.org
Subject: Re: Problem with HIGHMEM implementation for 32 bit mips-el port
From: Manish Lachwani <m_lachwani@yahoo.com>
Date: Mon, 31 Jan 2005 00:59:56 -0800 (PST)
Comment: DomainKeys? See http://antispam.yahoo.com/domainkeys
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; b=sQRrUV1CF5ic8eAndRuwWBJXIQ+rBjty+WFPjiTrHRmPmioTyOGOmC2UbrILlzpiG+40HOkbQu2LjgUJI3LidivqebypX2pYfzzptoSGRkLESJUbja8ekH1yym8IKAbhyvWQKT+COeKTGt+5ja9gggY7YkV6RCnFtxkUwIFIvzE= ;
In-reply-to: <4BF47D56A0DD2346A1B8D622C5C5902C472FE1@soc-mail.soc-soft.com>
Original-recipient: rfc822;linux-mips@linux-mips.org
Sender: linux-mips-bounce@linux-mips.org
please provide the detailed boot log. Also, Please use
the latest 2.4 kernel

Thanks
Manish



--- Rishabh@soc-soft.com wrote:

> 
> Hi all,
> 
> I am working on MIPS32 port of linux (kernel version
> 2.4.18) for R4000
> processor. While compilation was fine but the kernel
> boot up panics in
> "init".
> 
> I have 128MB RAM on the system where 64MB is located
> at 0x00000000
> physical address and the other 64MB is located at
> 0x20000000.
> 
> Also how is the address map for mips defined
> (highmem)?
> 
> Regards,
> 
> Rishabh
> 
> 
> The information contained in this e-mail message and
> in any annexure is
> confidential to the  recipient and may contain
> privileged information. If you are not
> the intended recipient, please notify the sender and
> delete the message along with
> any annexure. You should not disclose, copy or
> otherwise use the information contained
> in the message or any annexure. Any views expressed
> in this e-mail are those of the
> individual sender except where the sender
> specifically states them to be the views of
> SoCrates Software India Pvt Ltd., Bangalore.


<Prev in Thread] Current Thread [Next in Thread>