linux-mips
[Top] [All Lists]

Re: jump instruction in delay slot

To: Thomas Koeller <thomas.koeller@baslerweb.com>
Subject: Re: jump instruction in delay slot
From: Ralf Baechle <ralf@linux-mips.org>
Date: Tue, 19 Oct 2004 19:02:04 +0200
Cc: linux-mips@linux-mips.org, Andrew Dyer <adyer@righthandtech.com>
In-reply-to: <200410191900.02222.thomas.koeller@baslerweb.com>
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <B482D8AA59BF244F99AFE7520D74BF961A5B71@server1.RightHand.righthandtech.com> <200410191900.02222.thomas.koeller@baslerweb.com>
Sender: linux-mips-bounce@linux-mips.org
User-agent: Mutt/1.4.1i
On Tue, Oct 19, 2004 at 07:00:02PM +0200, Thomas Koeller wrote:

> > Also, idt has a good book online in pdf called
> > IDT MIPS Microprocessor Family
> > Software Reference Manual
> >
> > it has a good section on assembly collecting info
> > from a lot of places.
> 
> That was a good hint, thanks a lot!

In case you have an IRIX system with documentation at hand you may check
it's documentation.  The assembler dialects differ a bit but both are
close enough and some details are only well explained in the IRIX
documentation.

  Ralf

<Prev in Thread] Current Thread [Next in Thread>