linux-mips
[Top] [All Lists]

Re: IRQ problem on cobalt / 2.6.6

To: linux-mips@linux-mips.org
Subject: Re: IRQ problem on cobalt / 2.6.6
From: kieran@pawsoff.org (Kieran Fulke)
Date: Tue, 18 May 2004 21:59:14 +0100
In-reply-to: <20040518073439.GA6818@skeleton-jack>
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <20040513183059.GA25743@getyour.pawsoff.org> <20040518073439.GA6818@skeleton-jack>
Sender: linux-mips-bounce@linux-mips.org
User-agent: Mutt/1.5.6i
On Tue, May 18, 2004 at 08:34:39AM +0100, Peter Horton wrote:

> 
> Not quite so esoteric :-)
> 
> Try changing COBALT_QUBE_SLOT_IRQ from 23 to 9 in
> include/asm/cobalt/cobalt.h.
> 

alas, no joy.

<snip-snip>

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with 
idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:09.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c586a (rev 27) IDE UDMA33 controller on pci0000:00:09.1
    ide0: BM-DMA at 0x1420-0x1427, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x1428-0x142f, BIOS settings: hdc:pio, hdd:pio
spurious 8259A interrupt: IRQ9.

cheers,
Kieran.

Attachment: signature.asc
Description: Digital signature

<Prev in Thread] Current Thread [Next in Thread>