linux-mips
[Top] [All Lists]

Re: IRQ problem on cobalt / 2.6.6

To: linux-mips@linux-mips.org
Subject: Re: IRQ problem on cobalt / 2.6.6
From: kieran@pawsoff.org (Kieran Fulke)
Date: Sun, 16 May 2004 12:36:22 +0100
In-reply-to: <40A478B0.3070005@bitbox.co.uk>
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <20040513183059.GA25743@getyour.pawsoff.org> <40A478B0.3070005@bitbox.co.uk>
Sender: linux-mips-bounce@linux-mips.org
User-agent: Mutt/1.5.6i
On Fri, May 14, 2004 at 08:43:44AM +0100, Peter Horton wrote:

> Have you tried any other hardware in the slot, PCI network card perhaps ?
> 
> P.

yeah. adding cards like a tulip network card, linksys wmp11 wireless card. even 
a 
wintv pci (analogue) card all work ;

0000:00:0a.0 Ethernet controller: Digital Equipment Corporation DECchip 
21142/43 
(rev 41)
        Subsystem: Kingston Technologies: Unknown device 0001
        Flags: bus master, medium devsel, latency 64, IRQ 23
        I/O ports at 1080 [size=288M]
        Memory at 120c0400 (32-bit, non-prefetchable) [size=1K]
        Expansion ROM at 00040000 [disabled]

cat /proc/interrupts
           CPU0
  2:          0          XT-PIC  cascade
 14:      27636          XT-PIC  ide0
 18:     435142            MIPS  timer
 19:        696            MIPS  eth0
 20:          7            MIPS  eth2
 21:        302            MIPS  serial
 22:          0            MIPS  cascade
 23:     100002            MIPS  eth1


it just seems to be the DVB card that the pci code doesnt like, for some reason 
..

all ideas warmly received ;)

Kieran.

Attachment: signature.asc
Description: Digital signature

<Prev in Thread] Current Thread [Next in Thread>