Hi all,
I had built the kernel(2.2.24) for Alchemy pb1550 evaluation board using mvista
previewkit little endian toolchain and binutils-2.14.90.
I can able to flash the srec image(YAMON:tftp). I get following problem while
booting the image.
Please suggest me what could be the issue.
YAMON> load -r tftp://10.145.2.248/cramfsimage.srec
About to load tftp://10.145.2.248/cramfsimage.srec
Press Ctrl-C to break
........................................
........................................
........................................
........................................
........................................
........................................
........................................
........................................
........................................
........................................
........................................
........................................
........................................
..........
Start = 0xbf100000, range = (0xbf100000,0xbf521fff), format = SREC
YAMON> load -r tftp://10.145.2.248/zImage.srec
About to load tftp://10.145.2.248/zImage.srec
Press Ctrl-C to break
........................................
........................................
......................
Start = 0xbf000000, range = (0xbf000000,0xbf0cbfff), format = SREC
YAMON> go 0xbf000000
loaded at: BF000000 BF0CC000
relocated to: 81000000 810CC000
zimage at: 81006540 810CB74F
Uncompressing Linux at load address 80100000
Now booting the kernel
* Exception (user) : TLB (load or instruction fetch) *
CAUSE = 0x00808008 STATUS = 0x00000002
EPC = 0x00000000 ERROREPC = 0x80003004
BADVADDR = 0x00000000
$ 0(zr):0x00000000 $ 8(t0):0x000025bd $16(s0):0x00000001 $24(t8):0x80400058
$ 1(at):0x81000000 $ 9(t1):0x00000000 $17(s1):0x80083350 $25(t9):0x810cf020
$ 2(v0):0xb1100004 $10(t2):0x00000002 $18(s2):0x800442d8 $26(k0):0x00000000
$ 3(v1):0xb110001c $11(t3):0x0000027f $19(s3):0x08000000 $27(k1):0x00000000
$ 4(a0):0x00000001 $12(t4):0x80401058 $20(s4):0x00000000 $28(gp):0x00000000
$ 5(a1):0x80083350 $13(t5):0x810cb745 $21(s5):0x00000000 $29(sp):0x810cf0a0
$ 6(a2):0x800442d8 $14(t6):0x000025bd $22(s6):0x00000000 $30(s8):0xbf000000
$ 7(a3):0x08000000 $15(t7):0x0000000a $23(s7):0x00000000 $31(ra):0x810000dc
YAMON>
Thanks in advance,
Regards,
Xavier.
--
______________________________________________
Check out the latest SMS services @ http://www.linuxmail.org
This allows you to send and receive SMS through your mailbox.
Powered by Outblaze
|