linux-mips
[Top] [All Lists]

RE: IDE driver problem

To: Alan Cox <alan@lxorguk.ukuu.org.uk>, "Liu Hongming (Alan)" <alanliu@trident.com.cn>
Subject: RE: IDE driver problem
From: "Liu Hongming (Alan)" <alanliu@trident.com.cn>
Date: Wed, 25 Feb 2004 20:11:54 +0800
Cc: linux-mips@linux-mips.org
Original-recipient: rfc822;linux-mips@linux-mips.org
Sender: linux-mips-bounce@linux-mips.org

Thanks for your tips.

I have found out where the problem is. Since my hardware has
endian issue, fs/partition/msdos.c could not handle partition table
correctly. I have changed a little(still having much to change),and it
really works now.


-----Original Message-----
From: Alan Cox [mailto:alan@lxorguk.ukuu.org.uk]
Sent: Wednesday, February 25, 2004 6:10 AM
To: Liu Hongming (Alan)
Cc: linux-mips@linux-mips.org
Subject: Re: IDE driver problem


On Maw, 2004-02-24 at 05:09, Liu Hongming (Alan) wrote:
> Hi All,
>
> I am porting IDE drivers(Since my hardware has endian issue),
> and now it could work,however it has some abnormal problems:

Sounds like your partition data reading is wrong. Print out the
partition table bases and see if they are all zero

<Prev in Thread] Current Thread [Next in Thread>