linux-mips
[Top] [All Lists]

Re: r3000 instruction set

To: "Kevin D. Kissell" <kevink@mips.com>
Subject: Re: r3000 instruction set
From: Eric Christopher <echristo@redhat.com>
Date: Sun, 22 Feb 2004 19:37:29 -0800
Cc: Mark and Janice Juszczec <juszczec@hotmail.com>, linux-mips@linux-mips.org
In-reply-to: <001001c3f98e$2270dcc0$10eca8c0@grendel>
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <Law10-F39hgbi1Kigvf000046ac@hotmail.com> <1077477186.3636.34.camel@dzur.sfbay.redhat.com> <001001c3f98e$2270dcc0$10eca8c0@grendel>
Sender: linux-mips-bounce@linux-mips.org
On Sun, 2004-02-22 at 13:52, Kevin D. Kissell wrote:
> > Other than the responses you've already gotten, likely you'll need to
> > compile with -march=r3900(or -mcpu=r3900 if it's an old toolchain) since
> > the 3900 is missing a couple of r3000 instructions iirc.
> 
> The 3900 family should run MIPS I code compiled for the R3000.

IIRC there were some standard MIPS I instructions that were not on the
tx39.

-eric

-- 
Eric Christopher <echristo@redhat.com>


<Prev in Thread] Current Thread [Next in Thread>