linux-mips
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[PATCH] only setup kseg0 coherency after flush_cache_all ...

from [Jun Sun] [Permanent Link][Original]
To: linux-mips@linux-mips.org
Subject: [PATCH] only setup kseg0 coherency after flush_cache_all ...
From: Jun Sun <jsun@mvista.com>
Date: Fri, 9 Jan 2004 15:38:57 -0800
Cc: jsun@mvista.com
Original-recipient: rfc822;linux-mips@linux-mips.org
Sender: linux-mips-bounce@linux-mips.org
User-agent: Mutt/1.2.5i 
The change is needed to make CONFIG_MIPS_UNCACHED work.
Otherwise you end up with accessing stale data right after
switching off cache.

If no objections, I will check it in later.

Jun

Attachment: junk
Description: Text document

[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
  • [PATCH] only setup kseg0 coherency after flush_cache_all ..., Jun Sun <=
Previous by Date:  Re: Support for newer gcc/gas options, Dimitri Torfs
Next by Date:  Re: Support for newer gcc/gas options, Thiemo Seufer
Previous by Thread:  Re: Support for newer gcc/gas options, Dimitri Torfs
Next by Thread:  Running Linux on an NCD HMX X-Terminal, Adam Nielsen
Indexes:  [Date] [Thread] [Top] [All Lists]