linux-mips
[Top] [All Lists]

RE: How to increase download speed for UART

To: Pete Popov <ppopov@mvista.com>
Subject: RE: How to increase download speed for UART
From: Adeel Malik <AdeelM@avaznet.com>
Date: Fri, 26 Sep 2003 20:41:58 +0500
Cc: linux-mips@linux-mips.org
Original-recipient: rfc822;linux-mips@linux-mips.org
Sender: linux-mips-bounce@linux-mips.org
Yes this is an Motorola's S-Record File. Do you think that I am missing
something?. I am using YAMON to configure the UART's settings on the board
and HyperTerminal on the Host the transfer this file.

ADEEL 


-----Original Message-----
From: Pete Popov [mailto:ppopov@mvista.com]
Sent: Friday, September 26, 2003 8:45 PM
To: Adeel Malik
Cc: linux-mips@linux-mips.org
Subject: Re: How to increase download speed for UART


On Fri, 2003-09-26 at 08:32, Adeel Malik wrote:
> Hi All,
>          I am porting Linux to a MIPS based development platform. The
> UART on the board provides a maximum baud rate of 115 kbps. But the
> download time for the kernel Image of about 4.3 MB is about 4 hours
> !!!!!. 

4.3MB? Is this an SREC file? I've downloaded images over the serial port
(srec files) and it takes no more than 10 minutes.

Pete

> Can someone help me address this problem ?. 
>  
> (I can't download the kernel image via tftp server using ethernet, as
> the CPU doesn't have the MAC interface).
>  
> Regards,
> ADEEL MALIK,
>  
> 


<Prev in Thread] Current Thread [Next in Thread>