linux-mips
[Top] [All Lists]

RE: pcmcia problem on pb1500

To: JinuM <jinum@esntechnologies.co.in>
Subject: RE: pcmcia problem on pb1500
From: Jan Pedersen <jp@q-networks.com>
Date: 09 Jun 2003 10:01:56 +0200
Cc: linux-mips@linux-mips.org
In-reply-to: <AF572D578398634881E52418B2892567123350@mail.esn.activedirectory>
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <AF572D578398634881E52418B2892567123350@mail.esn.activedirectory>
Sender: linux-mips-bounce@linux-mips.org
I have tried a pci-card with a TI PCI1520PDV chip
and a card with a TI PCI1225PDV chip

with same result.

--
Jan

On Mon, 2003-06-09 at 09:30, JinuM wrote:
> Which Version of TI UltraMedia Card are you using?
> 
> -Jinu
> 
> -----Original Message-----
> From: Jan Pedersen [mailto:jp@q-networks.com]
> Sent: Monday, June 09, 2003 12:58 PM
> To: Pete Popov
> Cc: linux-mips@linux-mips.org
> Subject: Re: pcmcia problem on pb1500
> 
> 
> > Take a look at the toplevel Makefile. I bet you got the head of
> > linux-mips which is 2.5 and, yes, it's quite borked right now :) I've
> > made some progress on the Pb1500 but until I get that board fully
> > functioning, I won't update the rest.  To get 2.4, do a "cvs update
> > -rlinux_2_4".
> 
> No luck :-(
> 
> Tried 2.4.21-pre3 from linux-mips.org with both patches. This should be
> the configuration Jeff got to work.
> <cardmgr[159]: watching 2 sockets
> <cardmgr[159]: could not adjust resource: IO ports 0-0x1fff: Invalid
> argument
> <cardmgr[159]: could not adjust resource: IO ports 0xc00-0xcff: Invalid
> argument
> <cardmgr[159]: could not adjust resource: IO ports 0x100-0x4ff: Invalid
> argument
> <cardmgr[159]: could not adjust resource: memory 0x40000000-0x41ffffff:
> Invalid argument
> <cardmgr[160]: starting, version is 3.2.4
> <Done.
> <cardmgr[1cs: unable to map card memory!
> <60cs: unable to map card memory!
> 
> tried 2.4 from linux-mips.org
> <Linux Kernel Card Services 3.1.22
> <  options:  [pci] [cardbus]
> <yenta 00:0d.1: Preassigned resource 0 busy, reconfiguring...
> <yenta 00:0d.1: Preassigned resource 1 busy, reconfiguring...
> <yenta 00:0d.1: Preassigned resource 2 busy, reconfiguring...
> <Yenta IRQ list 0000, PCI irq1
> <Socket status: 30000046
> <Yenta IRQ list 0000, PCI irq1
> <Socket status: 30000011
> <cardmgr[159]: watching 2 sockets
> <cardmgr[159]: could not adjust resource: IO ports 0-0x1fff: Invalid
> argument
> <cardmgr[159]: could not adjust resource: IO ports 0xc00-0xcff: Invalid
> argument
> <cardmgr[159]: could not adjust resource: IO ports 0x100-0x4ff: Invalid
> argument
> <cardmgr[159]: could not adjust resource: memory 0x40000000-0x41ffffff:
> <Invalid argument
> <cardmgr[160]: starting, version is 3.2.4
> <Done.
> <cardmgrcs: unable to map card memory!
> <[1cs: unable to map card memory!
> 
> tried same with 64bit_pcmcia.patch
> same result. I guess that the 36bit patch is included in this kernel?
> 
> Tried 2.4.21 & 2.4.21-pre7 from kernel.org
> They die when initializing pci.
> 
> Are there different versions of the 36bit-patch? Mine is named
> 36bit_addr_121302.patch
> 
> regards
> Jan
> 
> > 
> > > On the other hand, everything else I need is currently working on 2.4.19
> > > (including pci)
> > > 
> > > Tried to do the 64bit_pcmcia.patch alone. Same result:
> > > 
> > > Linux Kernel Card Services 3.1.22
> > >   options:  [pci] [cardbus]
> > > Yenta IRQ list 0000, PCI irq4
> > > Socket status: 30000046
> > > Yenta IRQ list 0000, PCI irq4
> > > Socket status: 30000011
> > > cardmgr[148]: watching 2 sockets
> > > cardmgr[148]: could not adjust resource: IO ports 0xc00-0xcff: Invalid
> > > argument
> > > cardmgr[148]: could not adjust resource: IO ports 0x100-0x4ff: Invalid
> > > argument
> > > cardmgr[148]: could not adjust resource: memory 0x80000000-0x80ffffff:
> > > Invalid argument
> > > cardmgr[149]: starting, version is 3.2.4
> > > Done.
> > > cardmgr[cs: unable to map card memory!
> > > 14cs: unable to map card memory!
> > > 9]: initializing socket 1
> > > cardmgr[149]: socket 1: Anonymous Memory
> > > cardmgr[149]: module memory_cs.o not available
> > > cardmgr[149]: executing: 'modprobe memory_cs'
> > > cardmgr[149]: get dev info on socket 1 failed: Resource temporarily
> > > unavailable
> > > 
> > > Best result is with no patches, where it finds my cisco card.
> > > 
> > > > 
> > > > Take a look at the archives again and see how Jeff setup config.opts
> on
> > > > the target board. That was the key.  The cardmgr is recognizing your
> > > > card so it's reading the attribute memory successfully. You're almost
> > > > there ;)
> > > My configuration is based on his.
> > > yes, it seems like it can access the attribute memory, but not the io
> > > memory.
> > > 
> > > I was vondering about the io addresses shown with lspci -v. Are they
> > > valid?
> > 
> > I think so, yes.
> > 
> > Pete
> > 
> > > 00:0d.0 Class 0607: 104c:ac55 (rev 01)
> > >    I/O window 0: 00000000-00000fff
> > >    I/O window 1: 00000000-00000003
> > > 00:0d.1 Class 0607: 104c:ac55 (rev 01)
> > >    I/O window 0: 00000000-00000003
> > >    I/O window 1: 00001000-00001fff
> > > 
> > > anyway, thanks a lot for helping
> > > Jan
> > > 
> > > 
> > > 
> > > 
> > 
> 
> 



<Prev in Thread] Current Thread [Next in Thread>