linux-mips
[Top] [All Lists]

Re: pcmcia problem on pb1500

To: Jan Pedersen <jp@q-networks.com>
Subject: Re: pcmcia problem on pb1500
From: Pete Popov <ppopov@mvista.com>
Date: 06 Jun 2003 10:12:25 -0700
Cc: Linux MIPS mailing list <linux-mips@linux-mips.org>
In-reply-to: <1054919329.18838.184.camel@zeus.mvista.com>
Organization: MontaVista Software
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <1054907964.14600.172.camel@jp> <1054919329.18838.184.camel@zeus.mvista.com>
Sender: linux-mips-bounce@linux-mips.org
On Fri, 2003-06-06 at 10:08, Pete Popov wrote:
> Hi Jan,
> 
> > /etc/pcmcia/config.opts:
> > include port 0x100-0x4ff, port 0xc00-0xcff
> > include memory 0x80000000-0x80ffffff
> 
> I think you need something like that for mips as well.
> 
> > THEN, i saw in the linux-mips archives, that Jeff Baitis has succeeded
> > in getting it working on 2.4. He had applied two patches: 
> > Pete's 36bit_addr_2.4.21-pre4.patch
> > Pete's 64bit_pcmcia.patch
> 
> > I've found and patched theese into my kernel, but now, nothing works!
> 
> Not surprising :)  The 36bit_add_xxxx patch was applied to the tree so
> it's not integrated in the source tree. So this begs the question --

Sorry, this should read "...it's now integrated in the source..."

Pete

> what version of linux-mips are you using? If you're using the latest cvs
> bits, applying the above 36bit patch should have failed miserably. You
> do need the 64bit_pcmcia.patch though.
> 
> Take a look at the archives again and see how Jeff setup config.opts on
> the target board. That was the key.  The cardmgr is recognizing your
> card so it's reading the attribute memory successfully. You're almost
> there ;)
> 
> Pete
> 
> 
> 
> 


<Prev in Thread] Current Thread [Next in Thread>