linux-mips
[Top] [All Lists]

Re: Linux for MIPS Atlas 4Kc board -problems :(

To: kaos@sgi.com
Subject: Re: Linux for MIPS Atlas 4Kc board -problems :(
From: "Michael Anburaj" <michaelanburaj@hotmail.com>
Date: Thu, 01 May 2003 23:47:57 -0700
Cc: linux-mips@linux-mips.org
Original-recipient: rfc822;linux-mips@linux-mips.org
Sender: linux-mips-bounce@linux-mips.org
Hi Keith,

Thanks a lot.

Now its showing some ray of hope....

drivers/char/nvram.c | /sbin/genksyms -k 2.5.47 > include/linux/modules/drivers/char/nvram.ver.tmp
drivers/char/nvram.c:45: warning: `PC' redefined
include/asm/ptrace.h:18: warning: this is the location of the previous definition drivers/char/nvram.c:61: #error Cannot build nvram driver for this machine configuration.
make[3]: *** [include/linux/modules/drivers/char/nvram.ver] Error 1
make[2]: *** [drivers/char] Error 2
make[1]: *** [_modver_drivers] Error 2
make: *** [.hdepend] Error 2


Is this (NVRAM) not a mandatory device? If so is it possible to remove it using the menuconfig? I chose Atlas 4Kc. Let me know where it is located or the issue with this issue.

Thanks again,
-Mike.






From: Keith Owens <kaos@sgi.com>
To: "Michael Anburaj" <michaelanburaj@hotmail.com>
CC: linux-mips@linux-mips.org
Subject: Re: Linux for MIPS Atlas 4Kc board -problems :( Date: Fri, 02 May 2003 15:22:13 +1000

On Thu, 01 May 2003 22:07:32 -0700,
"Michael Anburaj" <michaelanburaj@hotmail.com> wrote:
>I did try that too...
>
>[root@localhost linux]# make ARCH=mips
>make -f scripts/Makefile.build obj=arch/mips/kernel
>arch/mips/kernel/offset.s
>  gcc -Wp,-MD,arch/mips/kernel/.offset.s.d -D__KERNEL__ -Iinclude -Wall
>-Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer
>-fno-strict-aliasing -fno-common -I /usr/src/linux/include/asm/gcc -G 0
>-mno-abicalls -fno-pic -pipe -mcpu=r4600 -mips2 -Wa,--trap -nostdinc
>-iwithprefix include    -DKBUILD_BASENAME=offset   -S -o
>arch/mips/kernel/offset.s arch/mips/kernel/offset.c
>gcc: cannot specify -o with -c or -S and multiple compilations
>make[1]: *** [arch/mips/kernel/offset.s] Error 1
>make: *** [arch/mips/kernel/offset.s] Error 2

Because you mentioned Redhat 9, I have to assume that you are cross
compiling from i386 to mips, is that correct?  If so, you need make
ARCH=mips and you have to specify the cross compile tools as well,
something like this :-

  make ARCH=mips CROSS_COMPILE=/usr/bin/mips-linux- ...

If you are doing a native mips compile then the problem is that your
version of gcc does not like one or more of the command options, the
unknown option is being treated as a filename.



_________________________________________________________________
Help STOP SPAM with the new MSN 8 and get 2 months FREE* http://join.msn.com/?page=features/junkmail


<Prev in Thread] Current Thread [Next in Thread>