linux-mips
[Top] [All Lists]

Re: NCD900 port?

To: "Chip Coldwell" <coldwell@frank.harvard.edu>
Subject: Re: NCD900 port?
From: "Kevin D. Kissell" <kevink@mips.com>
Date: Fri, 25 Apr 2003 08:53:02 +0200
Cc: <linux-mips@linux-mips.org>
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <Pine.LNX.4.44.0304241839110.19067-100000@frank.harvard.edu>
Sender: linux-mips-bounce@linux-mips.org
> On Thu, 24 Apr 2003, Chip Coldwell wrote:
> 
> > On Thu, 24 Apr 2003, Kevin D. Kissell wrote:
> > > 
> > > What PCI bridge is being used?  Galileo?
> > 
> > Good question.  Short answer: I don't know.  I'll pry off the hood
> > and take a peek at what's on the board, unless this is something that
> > shares a die with the CPU.
> 
> It was easy to identify once I took off the cover.  The PCI bridge is
> made by V3 Semiconductor (now a part of QuickLogic?), part number
> V32OUSC-75LP (Rev. B1):
> 
> http://www.quicklogic.com/home.asp?PageID=235&sMenuID=126
> 
> Is this the one called "Galileo"?

No, Galileo is/was a different company.  So you may not be able
to recycle as much existing code as you might have otherwise, but 
at least you've got some documentation for it.

            Kevin K.

<Prev in Thread] Current Thread [Next in Thread>