linux-mips
[Top] [All Lists]

Re: (usagi-users 02263) Usagi kernel for MIPS target

To: Santosh <ipv6_san@rediffmail.com>
Subject: Re: (usagi-users 02263) Usagi kernel for MIPS target
From: Tiemo Krueger - mycable GmbH <tk@mycable.de>
Date: Wed, 12 Mar 2003 10:06:34 +0100
Cc: linux-mips@linux-mips.org
In-reply-to: <20030312084946.7398.qmail@webmail27.rediffmail.com>
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <20030312084946.7398.qmail@webmail27.rediffmail.com>
Sender: linux-mips-bounce@linux-mips.org
User-agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:1.2b) Gecko/20021016
I had some time ago some trouble with xconfig, it seems that some
dependencies between configuration topics are not setup properly for MIPS
try the normal 'config' instead.
I remember that RTC was one of the appearing problems

Tiemo

Santosh wrote:

i tried compiling this way

# make ARCH=mips xconfig
i get
ERROR - Attempting to write value for unconfigured variable (CONFIG_VTAG_ICACHE) ERROR - Attempting to write value for unconfigured variable (CONFIG_BINFMT_ELF32) ERROR - Attempting to write value for unconfigured variable (CONFIG_SERIAL)
ERROR - Attempting to write value for unconfigured variable (CONFIG_RTC)

Don't know what's wrong.
I have configured for MIPS Malta (Experimental) board

then i did # make ARCH=mips dep

finally # make ARCH=mips CROSS_COMPILE=mipsel-linux-

Now i get
binfmt_elf.c: In function 'load_elf_interp':
binfmt_elf.c:278: 'EF_MIPS_ABI2' undeclared
binfmt_elf.c:278: 'EF_MIPS_ABI' undeclared
make[2]:Leaving directory '/home/user/usagi/kernel/linux24/fs'
make:***[_dir_fs]Error 2

Is Usagi stable on MIPS Malta board ??
Pls tell me what's wrong.

-Santosh
------------------------------------------


On Wed, 12 Mar 2003 KUNITAKE Koichi wrote :

  Hello,

On 12 Mar 2003 07:08:17 -0000
"Santosh " <ipv6_san@rediffmail.com> wrote:

>Can someone tell me what changes i have to make to compile the
>sources successfully for MIPS target ???

  I have never compiled USAGI for MIPS target, but I think you
should edit linux24/Makefile as following.


--- Makefile.orig       2003-03-12 16:55:06.000000000 +0900
+++ Makefile    2003-03-12 16:55:32.000000000 +0900
@@ -5,7 +5,8 @@

KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)

-ARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ -e s/arm.*/arm/ -e s/sa110/arm/) +#ARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ -e s/arm.*/arm/ -e s/sa110/arm/)
+ARCH := mips
 KERNELPATH=kernel-$(shell echo $(KERNELRELEASE) | sed -e "s/-//g")

 CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
@@ -19,7 +20,7 @@
 HOSTCC         = gcc
 HOSTCFLAGS     = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer

-CROSS_COMPILE  =
+CROSS_COMPILE  = mips-linux-

 #
 # Include the make variables (CC, etc...)


  Did this fail?

Best regards,


__________________________________________________________
Great Travel Deals, Airfares, Hotels on
http://www.journeymart.com/rediff/travel.asp





--
-------------------------------------------------------
Tiemo Krueger       Tel:  +49 48 73 90 19 86
mycable GmbH        Fax: +49 48 73 90 19 76
Boeker Stieg 43
D-24613 Aukrug      eMail: tk@mycable.de

Public Kryptographic Key is available on request
-------------------------------------------------------



<Prev in Thread] Current Thread [Next in Thread>