linux-mips
[Top] [All Lists]

Re: Mycable XXS board

To: Dan Malek <dan@embeddededge.com>, Jun Sun <jsun@mvista.com>
Subject: Re: Mycable XXS board
From: Bruno Randolf <br1@4g-systems.de>
Date: Tue, 11 Mar 2003 11:30:57 +0100
Cc: linux-mips@linux-mips.org
In-reply-to: <3E691514.7000907@embeddededge.com>
Organization: 4G Mobile Systeme
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <3E689267.3070509@prosyst.bg> <20030307133919.P26071@mvista.com> <3E691514.7000907@embeddededge.com>
Sender: linux-mips-bounce@linux-mips.org
User-agent: KMail/1.5
On Friday 07 March 2003 22:54, Dan Malek wrote:

> That's what I wanted to clarify.  Are we discussing one of the on-chip
> peripheral USB controllers of the Au1xxx, or is it a PCI USB controller
> that was plugged into the Au1500.  In the case of the on-chip controller,
> there aren't any interrupt routing problems, it's identical (and the same
> code) on all Au1xxx boards.

we are discussing the on-chip USB controller for the mycable board. and its 
little endian...

any ideas where the assignment errors could come from in this case?

thanks,
bruno

<Prev in Thread] Current Thread [Next in Thread>