linux-mips
[Top] [All Lists]

RE: MIPS Malta board Linux installation

To: "'ZhouY.external@infineon.com'" <ZhouY.external@infineon.com>, linux-mips@linux-mips.org
Subject: RE: MIPS Malta board Linux installation
From: ncrook <ncrook@micron.com>
Date: Thu, 27 Feb 2003 08:36:19 -0700
Original-recipient: rfc822;linux-mips@linux-mips.org
Sender: linux-mips-bounce@linux-mips.org
>>Start = 0x80100608, range = (0x80100000,0x8024015f), format = SREC
>>YAMON> go . nfsroot=192.168.149.1:/c/linux/mipseb ip=192.168.149.116
>>
>>LINUX started...
>>EURfÐñoeíï>ßüÿû_ÿÿö~ÿÿ¿ßÿë¬RÿßïþëÿÛþïùúßm»>ÿÿÿûÿë®Þýí}®¿ùýoÞ÷ÿï?mÿêó¯Íëýïÿ³ÿ
>>ÿÝûïî¯÷ÿïÿûÿÏÿÿ¿¯ÿý»ºÿgÿ¿ÿ~ÿÿßþÿûþêþÿ÷ÿÿïÿê÷×¢ÿh«Ïÿßýïÿÿþûÿÿýûÿ{ÿ®ÿÿÿÿß÷/óÿí


looks like your serial port baud rate is wrong. At some stage, the
current setting (left by YAMON) gets overwritten by UART setup in 
Linux. Try changing:

go . nfsroot=192.168.149.1:/c/linux/mipseb ip=192.168.149.116

to:

go . nfsroot=192.168.149.1:/c/linux/mipseb ip=192.168.149.116 
console=ttyS0,38400

(38400 is the baud rate.. use the value you want)

Just my guess.. worth as much as you paid for it!!

Neal.

<Prev in Thread] Current Thread [Next in Thread>