linux-mips
[Top] [All Lists]

Re: MOPD problems

To: Justin Pauley <jpauley@xwizards.com>
Subject: Re: MOPD problems
From: Dave Airlie <airlied@csn.ul.ie>
Date: Thu, 16 Jan 2003 06:20:13 +0000 (GMT)
Cc: linux-mips@linux-mips.org
In-reply-to: <1042681801.2735.108.camel@Opus>
Original-recipient: rfc822;linux-mips@linux-mips.org
Sender: linux-mips-bounce@linux-mips.org
Ah sorry I was thinking I think of another problem.. that you get later on
in the boot .. it shouldn't affect the mop load... you are using Maciej's
mopd? it is the only one known to work ..

Dave.

On Wed, 15 Jan 2003, Justin Pauley wrote:

> Sorry, but it didn't seem to work. For the decstation hostname I just
> used "decstation" and added an entry into my /etc/hosts for the the IP
> address I think it is. However, I am not sure exactly what ip address it
> is nor do I know how to figure it out.
>
> I figured out by turning on promiscuous mode I get the connection to my
> box but the decstation still does the "???" thing as I mentioned before.
> Any ideas are appreciated, and thank you Dave.
>
> Justin
>
> On Wed, 2003-01-15 at 20:04, Dave Airlie wrote:
> >
> > sometimes a long time agao.. you needed to manually add the ethernet
> > address of the decstation to the arp table on the host machine..
> >
> > arp -s <decstation_hostname> <ethernet_address>
> >
> > give that a go...
> >
> > Dave.
> >
> > On Wed, 15 Jan 2003, Justin Pauley wrote:
> >
> > > I downloaded the mopd server and installed a bunch of the patches until
> > > mopd compiled. I downloaded the mopimage and put it in my /tftpboot/mop
> > > with the correct name. However, after running mop with "mopd -d eth0"
> > > and then running "boot 3/mop" on my decstation nothing happens. However,
> > > I have noticed that when I run a packet dumping software (etherreal) and
> > > then I try it I get this on my mopd:
> > >
> > > MOP DL 8:0:2b:2e:77:40   > ab:0:0:1:0:0      len   11 code 08 RPR
> > > MOP DL 0:d0:9:f8:fc:a5   > 8:0:2b:2e:77:40   len    1 code 03 ASV
> > > MOP DL 8:0:2b:2e:77:40   > 0:d0:9:f8:fc:a5   len   11 code 08 RPR
> > > MOP DL 0:d0:9:f8:fc:a5   > 8:0:2b:2e:77:40   len 1058 code 02 MLD
> > >
> > > This in my syslog:
> > > Jan 15 18:30:47 opus mopd[18215]: 8:0:2b:2e:77:40 (1) Do you have
> > > 08002b2e7740? (Yes)
> > > Jan 15 18:30:47 opus mopd[18215]: 8:0:2b:2e:77:40 Send me 08002b2e7740
> > >
> > > but then my Decstation produces something similar to the following:
> > >
> > > >> boot 3/mop
> > >
> > > ???
> > > ? PC: 0x.....
> > > ? CR: 0x....
> > > ? SR: 0x....
> > > ? VA: 0x0
> > > ? ER: 180....
> > > ? MER: 0x162....
> > >
> > > and then returns back to the console ">>".
> > > (note that the ... were added by me to replace a long line of
> > > numbers/letters)
> > >
> > >
> > > if you know of something I can try, please let me know.
> > >
> > > Thanks,
> > > Justin Pauley
> > >
> > >
> >
> > --
> > David Airlie, Software Engineer
> > http://www.skynet.ie/~airlied / airlied@skynet.ie
> > pam_smb / Linux DecStation / Linux VAX / ILUG person
> >
> >
>
>
>

-- 
David Airlie, Software Engineer
http://www.skynet.ie/~airlied / airlied@skynet.ie
pam_smb / Linux DecStation / Linux VAX / ILUG person



<Prev in Thread] Current Thread [Next in Thread>