[Top] [All Lists]

RE: Help in cross-compiler--gcc3.2-7.1 error

To: 'Brad Barrett' <>,
Subject: RE: Help in cross-compiler--gcc3.2-7.1 error
From: Chien-Lung Wu <>
Date: Wed, 18 Dec 2002 17:21:39 -0500
Cc: Chien-Lung Wu <>
Original-recipient: rfc822;
Hi, Brad:

Thanks for your information.
I download:
        binutils                        v2. (H.J. Lu)
        GCC                             v3.2-7.1 (H.J. Lu)
        glibc                           v2.2.5
        glibc-linuxthreads      v2.2.5

and follow your build note to build a big-endian mips cross-compiler.

As I build the binutil-, it is o.k.

However, as I build the gcc (1st), I get the error message:

make[1]: Leaving directory `/home/lineo/xcompiler/mips-gcc-3.2.7/libiberty'
make[1]: Entering directory `/home/lineo/xcompiler/mips-gcc-3.2.7/gcc'
gcc -DIN_GCC -DCROSS_COMPILE   -g -O2 -W -Wall -Wwrite-strings
-Wstrict-prototypes -Wmissing-prototypes -Wtraditional -pedantic
 gengenrtl.o ../libiberty/libiberty.a
 ../libiberty/libiberty.a: could not read symbols: Archive has no index; run
 ranlib to add one
 collect2: ld returned 1 exit status
 make[1]: *** [gengenrtl] Error 1
 make[1]: Leaving directory `/home/lineo/xcompiler/mips-gcc-3.2.7/gcc'
 make: *** [all-gcc] Error 2

Do I miss something?
Since I download the gcc3.2-7.1.src.rpm (only srpm format), I use 

        rpm --rebuild gcc3.2-7.1.src.rpm

then I got gcc-3.2-20020903.tar.bz2 and many patch files.

I umcompress the gcc-3.2-20020903.tar.bz2 using the command
        tar -xvIf gcc-3.2-20020903.tar.bz2 
==>I get the gcc-3.2-20020903.

        Do I need to patch all the patch files? If so, how can I patch all
of them?
        or is the tarball pached?

Regarding to the error message, is it caused by missing some patch files?
How can I fix this problem?



-----Original Message-----
From: Brad Barrett []
Sent: Wednesday, December 18, 2002 12:34 PM
To: Chien-Lung Wu;
Subject: RE: Help in cross-compiler

On Wednesday 18 December 2002 10:57 am, you wrote:

> I am working on the embedded linux system on bug endian mips (mips-linux).
> As I understand, I need to get the cross-compiler work on my linux-i686
> host (redhat 7.2).
> Following the Bradly's "Building a modern MIPS cross-toolchain for linux",
>  I download following packages:
>       binutils-2.11
>       gcc-2.95
>       glibc-2.2.5
>       glibc-linuxthreads-2.2.5
> And following the procedue:
> However, I got the error_message:
>- include/bits/mathinline.h:426:
>       unknown register name `st(1)' in `asm'
> Does any have any idea to fix this error?

It sounds like you used the standard binutils.  You should probably use H.J.
Lu's binutils (they have some MIPS patches applied), and also his gcc (same
story).  They're available at:

> When I build the C cross-compiler, I use the "dubious hack"
> --with-headers=/usr/include copy the "MIPS host header files". Are there
> any other ways to copy the MIPS-host headers?

I never understood why anyone would use this method.  If you're building a
mips-linux cross-compiler, you should have a copy of the Linux kernel source
from lying around somewhere (or are you using a pre-compiled
kernel image?).  Just copy the include directory from this source to a
convenient location, symbolically link asm to asm-mips and point the gcc
configure to it.

I've included below my personal build notes from a mipsel (little-endian)
cross-toolchain I built a couple months ago.  Hopefully these will be
Note that I chose /opt/toolchains/mips for the installed path, rather than
/usr/local.  My build system was SuSE 7.2 (gcc version 2.95.3 20010315
and binutils version 2.10.91).

Also, you don't mention applying the glibc-2.2.5-mips-build-gmon.diff patch
Brad LaRonde recommends.  If you didn't apply this patch, you might also
want to
do that.


----------------Build Notes------------------------------------

I relied primarily on Steven J. Hill's build script [SJH], but with several

H.J. Lu says only his binutils will work:
I got the latest version.

H.J. Lu also says to use his gcc 3.2.  This is available only in source rpm
format, at:

Glibc came from the standard location:
*Except*...patched with "glibc-2.2.5-mips-build-gmon.diff" from [BDL2.4].
This source also recommends the "-finline-limit=10000" CFLAG value (claims won't work without it, and this seems to be true).

Tool versions:
Binutils             v2. (H.J. Lu)
GCC                  v3.2 (H.J. Lu)
Glibc                v2.2.5
Glibc-linuxthreads   v2.2.5


Build Log
[Implied "su" to root prior to each "make install" below.]

1. Downloaded tarballs/rpms and unpacked to:
               (linuxthreads is unpacked into the glibc-2.2.5 directory)

2. Binutils:
  cd ~/mipsel-cross/binutils-2.13/mips
  chmod 744 README
  cd ..
  ./mips/README  (apply HJ Lu's patches)
  mkdir ~/mipsel-cross/mipsel-binutils
  cd ~/mipsel-cross/mipsel-binutils
  ../binutils-2.13/configure --prefix=/opt/toolchains/mips \
      --enable-targets=mips64el-linux,mipsel-linux --target=mipsel-linux \
  make install

3. Gcc (1st time)
  cp -R ~/linux-2.4/include/asm-mips
  cp -R ~/linux-2.4/include/linux
  cd /opt/toolchains/mips/mipsel-linux/include
  ln -s asm-mips asm
  mkdir ~/mipsel-cross/mipsel-gcc
  cd ~/mipsel-cross/mipsel-gcc
  AR=mipsel-linux-ar  RANLIB=mipsel-linux-ranlib  ../gcc-3.2/configure  \
      --prefix=/opt/toolchains/mips  --with-newlib  --enable-languages=c  \
      --target=mipsel-linux  --disable-shared  --disable-threads
  make install

4. Glibc
  cd ~/mipsel-cross/glibc-2.2.5
  patch -p1 -i ../glibc-2.2.5-mips-build-gmon.diff
    (patch asked for name of each file to patch...had to type them in)
  mkdir ~/mipsel-cross/mipsel-glibc
  cd ~/mipsel-cross/mipsel-glibc
  CFLAGS="-O2 -g -finline-limit=10000"  LD_LIBRARY_PATH=  \
  BUILD_CC=gcc  CC=mipsel-linux-gcc  AR=mipsel-linux-ar  AS=mipsel-linux-as
      RANLIB=mipsel-linux-ranlib  ../glibc-2.2.5/configure  \
      --prefix=/opt/toolchains/mips/mipsel-linux  --host=mipsel-linux  \
      --build=i686-pc-linux-gnu  --enable-add-ons  --with-elf  \
      --disable-profile  \
      --with-headers=/opt/toolchains/mips/mipsel-linux/include  \
      --mandir=/opt/toolchains/mips/man  --infodir=/opt/toolchains/mips/info
  make install

5. Gcc (2nd time - with full glibc support)
  mkdir ~/mipsel-cross/mipsel-gccfull
  cd ~/mipsel-cross/mipsel-gccfull
  AR=mipsel-linux-ar  RANLIB=mipsel-linux-ranlib  ../gcc-3.2/configure  \
      --prefix=/opt/toolchains/mips  --enable-languages=c,c++  \
      --target=mipsel-linux  --enable-shared  --enable-threads  \
      --includedir=/opt/toolchains/mips/mipsel-linux/include  \
      --with-gxx-include-dir=/opt/toolchains/mips/mipsel-linux/include  \
      --mandir=/opt/toolchains/mips/man  --infodir=/opt/toolchains/mips/info
  make install

[BDL2.4]   LaRonde, Bradley D., "Building a Modern MIPS Cross-Toolchain for
           Linux", v2.4, 2002-09-25,


----------------End Build Notes--------------------------------

Brad Barrett
Staff Engineer, Patton Electronics

<Prev in Thread] Current Thread [Next in Thread>