linux-mips
[Top] [All Lists]

Re: Linux on DDB5074 board crashes

To: Atifa Kheel <atifa_kheel@yahoo.com>
Subject: Re: Linux on DDB5074 board crashes
From: Jun Sun <jsun@mvista.com>
Date: Thu, 31 Oct 2002 09:56:00 -0800
Cc: linux-mips@linux-mips.org, jsun@mvista.com
In-reply-to: <20021031051117.59421.qmail@web12605.mail.yahoo.com>; from atifa_kheel@yahoo.com on Wed, Oct 30, 2002 at 09:11:17PM -0800
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <20021031051117.59421.qmail@web12605.mail.yahoo.com>
Sender: linux-mips-bounce@linux-mips.org
User-agent: Mutt/1.2.5i
Atifa,

Sorry to hear you are still fighting with problem.

I am more convinced it is a CPU related problem.  Since
there is no default config for DDB5074, can you post your
config file?  One possible problem is that you might 
be using R5432 routines which is not correct.   DDB5074
uses VR5000 CPU.

Jun

On Wed, Oct 30, 2002 at 09:11:17PM -0800, Atifa Kheel wrote:
> Hello,
> 
> I am trying to boot Linux-2.4.18(sgi distribution)on
> ddb5074 board. 
> Initially there was a problem with the network
> card(ether expresspro 100) not being intialized and it
> used to fail in the self test.
> Then i applied the patch which did the pci_auto to
> assign the pci resources.
> With this i was able to get the network card working
> and setup NFS rootfile system.
> 
> But now the problem is like this:
> 
> The kernel boots and once the VFS is mounted and init
> starts executing sash the kernel crashes,
> even a simple user application(simple hello world
> program) crashes giving "unaligned access"
> 
> The output is not consistent all the time,it sometimes
> just hangs without any output and sometimes produces
> the oops.
> 
> There was a discussion on the mailing list about
> "unaligned access" problem in 2.4.18 kernel, and a
> patch was suggested(patch to
> arch/mips/kernel/unaligned.c),i tried even this patch
> but it didn't help.
> 
> Thinking the problem may be with the kernel version,i
> moved onto linux2.5.1(with the pci_auto patch) but
> still the problem persists.
> 
> i have build my user application using,
> mipsel-linux-gcc -static -mips2 -o hello hello.c
> 
> To check whether it was a problem with the
> application( sash or hello) itself ,i tested the same
> application on another MIPS variant running the
> Monta-vista distribution. There it works fine, so does
> not seem to be an application problem,
> 
> Looking at the oops message it looks that the kernel
> is crashing in emulate_load_store instruction while
> doing lwl or swl instruction.(this is looking at the
> System.map file)
> It looks like this happening when it is doing exec of
> the user application.But i think the exec code cannot
> be suspected here.
> probably some corruption trigerring up here.
> 
> Can we suspect anything around the time of exec? Can
> it be a problem with the way the application was
> compiled?
> 
> Enclosed is the log for further reference.
> Any pointers would be of great help,
> thanx
> Atifa
> 
> 
> 
> __________________________________________________
> Do you Yahoo!?
> HotJobs - Search new jobs daily now
> http://hotjobs.yahoo.com/
Content-Description: linux2.4.18log2.TXT
> 
> Loading elf file: 192.168.1.89:vmlinux
>  0x80080000/1363144 
> |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/
>  + 0x801ce000/282624 
> -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\
>  + 0x80213000/130608 |/-\|/-\|/-\|/-\|/-\| + 4546 syms 
> /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\
> Entry address is 8008072c
> PMON> g root=nfs
> Loading R4000 MMU routines.
> CPU revision is: 00002321
> Primary instruction cache 32kb, linesize 32 bytes.
> Primary data cache 32kb, linesize 32 bytes.
> Linux version 2.4.18 (atifa@posix) (gcc version 3.0.3) #354 Wed Oct 30 
> 21:48:33 IST 2002
> Determined physical RAM map:
>  memory: 04000000 @ 00000000 (usable)
> On node 0 totalpages: 16384
> zone(0): 4096 pages.
> zone(1): 12288 pages.
> zone(2): 0 pages.
> Kernel command line: root=nfs 
> Calling serial console init
> After parse options time_init intialization
> After trap_init intialization
> IN init_IRQ
> CPU_IRQ_BASE: 32
> enabling 8259 cascade
> After init_IRQ intialization
> After sched_init intialization
> After softirq_init intialization
> Calibrating delay loop... 199.47 BogoMIPS
> Memory: 62316k/65536k available (1331k kernel code, 3220k reserved, 77k data, 
> 196k init)
> Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
> Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
> Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
> Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
> Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
> Checking for 'wait' instruction...  available.
> POSIX conformance testing by UNIFIX
> PCI Autoconfig: Found Bus 0, Device 0, Function 0
> PCI Autoconfig: Found Bus 0, Device 1, Function 0
> PCI Autoconfig: BAR 0, I/O, size=0x80, address=0x1000
> PCI Autoconfig: BAR 1, Mem, size=0x80, address=0x8100000
> PCI Autoconfig: Found Bus 0, Device 3, Function 0
> PCI Autoconfig: BAR 0, Mem, size=0x1000, address=0x8101000
> PCI Autoconfig: BAR 1, I/O, size=0x20, address=0x1080
> PCI Autoconfig: BAR 2, Mem, size=0x100000, address=0x8200000
> PCI Autoconfig: Found Bus 0, Device 10, Function 0
> PCI Autoconfig: BAR 0, I/O, size=0x40, address=0x10c0
> PCI Autoconfig: BAR 1, I/O, size=0x20, address=0x1100
> PCI Autoconfig: Found Bus 0, Device 13, Function 0
> PCI Autoconfig: BAR 0, Mem, size=0x1000, address=0x8300000
> Scanning bus 00
> 
> calling pci_name_device PCI device 10b9:1533
> PCI device 10b9:1533Acer Laboratories Inc. [ALi] M1533 PCI to ISA Bridge 
> [Aladdin IV]
> calling pci_name_device PCI device 1011:0009
> PCI device 1011:0009Digital Equipment Corporation DECchip 21140 [FasterNet]
> calling pci_name_device PCI device 8086:1229
> PCI device 8086:1229Intel Corp. 82557 [Ethernet Pro 100]
> calling pci_name_device PCI device 10b9:7101
> PCI device 10b9:7101Acer Laboratories Inc. [ALi] M7101 PMU
> calling pci_name_device PCI device 10b9:5237
> PCI device 10b9:5237Acer Laboratories Inc. [ALi] M5237 USBFixups for bus 00
> irq_map[0]: 1c
> irq_map[1]: 18
> irq_map[3]: 19
> irq_map[10]: 1c
> irq_map[13]: 1c
> Linux NET4.0 for Linux 2.4
> Based upon Swansea University Computer Society NET3.039
> Initializing RT netlink socket
> Starting kswapd
> devfs: v1.10 (20020120) Richard Gooch (rgooch@atnf.csiro.au)
> devfs: boot_options: 0x0
> *******rs_init called 
> Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI 
> enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> ttyS01 at 0x02f8 (irq = 3) is a 16550A
> block: 128 slots per queue, batch=32
> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
> eepro100.c:v1.09j-t 9/29/99 Donald Becker 
> http://www.scyld.com/network/eepro100.html
> eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin 
> <saw@saw.sw.com.sg> and others
> status i pci_find_capability 640 device hdr type 0
> status i pci_find_capability 640 device hdr type 0
> set pwer state=-5 
> tx_ring_dma=11b8000
> eth0: Intel Corp. 82557 [Ethernet Pro 100], 00:A0:C9:6B:32:7D, IRQ 25.
>   Receiver lock-up bug exists -- enabling work-around.
>   Board assembly 678400-001, Physical connectors present: RJ45
>   Primary interface chip i82555 PHY #1.
>   General self-test: passed.
>   Serial sub-system self-test: passed.
>   Internal registers self-test: passed.
>   ROM checksum self-test: passed (0x49caa8d6).
>   Receiver lock-up workaround activated.
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP, IGMP
> IP: routing cache hash table of 512 buckets, 4Kbytes
> TCP: Hash tables configured (established 4096 bind 8192)
> **IN ip auto config
> **in ic_dynamic
> Sending BOOTP requests ..... OK
> IP-Config: Got BOOTP answer from 192.168.1.192, my address is 192.168.1.161
> IP-Config: Complete:
>       device=eth0, addr=192.168.1.161, mask=255.255.255.0, gw=255.255.255.255,
>      host=iddb-5074, domain=, nis-domain=(none),
>      bootserver=192.168.1.192, rootserver=192.168.1.192, 
> rootpath=/tftpboot/iddb-5074
> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> In nfs_root_data
> Looking up port of RPC 100003/2 on 192.168.1.192
> Looking up port of RPC 100005/1 on 192.168.1.192
> VFS: Mounted root (nfs filesystem).
> In init
> Freeing unused kernel memory: 196k freed
> Unhandled kernel unaligned access in unaligned.c:emulate_load_store_insn, 
> line 373:
> $0 : 00000000 90017c00 811e7b30 00000000
> $4 : ad220000 811e7b28 000033ca 811e7c10
> $8 : 90017c01 1000001e 00000000 7fff7fdd
> $12: 00000003 00000001 00000001 811b9e40
> $16: 800dde7c 811e7b28 81183120 00000000
> $20: 10000000 00006012 811e7ef0 811e7d80
> $24: 00000002 8117c138
> $28: 811e6000 811e7b08 00000004 8008a738
> epc   : 8008d990    Not tainted
> Status: 90017c03
> Cause : 00000010
> Process sh (pid: 1, stackpage=811e6000)
> Stack: 00000000 800b95a4 811e7b38 00000000 00000001 811b9ec0 8008a738 00006012
>        811e7ef0 811e7d80 00000000 800ef770 811e7b38 811e7b38 00000000 90017c00
>        00000000 7fff7f50 7fff7fdd 00000004 00000008 811e7c10 00000000 7fff7fc0
>        00000000 7fff7fdd 00000003 00000001 00000001 811b9e40 00000001 811b9ec0
>        81183120 00000000 10000000 00006012 811e7ef0 811e7d80 00000002 8117c138
>        801ffb70 ...
> Call Trace: [<800b95a4>] [<8008a738>] [<800ef770>] [<800deb10>] [<800dde80>] 
> [<800deb10>] [<800ded98>] [<800ef7fc>] [<800afa68>] [<800b061c>] [<800b06a4>] 
> [<800d01a0>] [<800de59c>] [<800ca5ac>] [<800ca8b4>] [<800cbd70>] [<8008cd00>] 
> [<800d0b0c>] [<801ad7c8>] [<8008d584>] [<8008d584>] [<801ad4bc>] [<801ad4bc>] 
> [<801ad4bc>] [<8009cc54>] [<800b9848>] [<8009ce88>] [<8009cdb0>] [<801ae760>] 
> [<80090344>] [<800883a4>] [<801ad7c8>] [<80088494>] [<801ad814>] [<801b271c>] 
> [<801b2668>] [<8008836c>] [<80088c1c>] [<80088020>] [<80088c0c>]
> Code: 00511021  8c430018  a8c30003 <b8c30000> 080235f8  8fbf0018  24c20008  
> 00101827  00c21025 
> Kernel panic: Attempted to kill init!
>  <0>Rebooting in 180 seconds..a0020000: heap is already above this poinô
> PMON version 0.0.365 [DDB-VRC4374,EL,NET]
> NEC Electronics,  Sun Dec 20 15:55:12 PST 1998
> This is free software, and comes with ABSOLUTELY NO WARRANTY,
> you are welcome to redistribute it without restriction.
> CPU type R5000.  Rev 2.1.  133 MHz.
> Memory size 64 MBytes.
> Icache size 32 Kbytes, 32 bytes/line.
> Dcache size 32 Kbytes, 32 bytes/line.
> User Space from 0xa005c7b8 to 0xa4000000 
> 
> 
> PMON> initEther
> a0020000: heap is already above this poinô
> PCI Slot 2  Vendor ID = 0x91011 
> Assign PCI IO Addr 0x6100000 to  PCI slot 2 
> 
> en0: enabling 10baseT UTP port
> : DC21140 [10-100Mb/s] pass 2.2 Ethernet address 00:00:4c:80:a2:dd
> en0: enabling 10baseT UTP port
> PMON> boot
> Loading elf file: 192.168.1.89:vmlinux
>  0x80080000/1363144 
> |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/
>  + 0x801ce000/282624 
> -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\
>  + 0x80213000/130608 |/-\|/-\|/-\|/-\|/-\| + 4546 syms 
> /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\
> Entry address is 8008072c
> PMON> g root=nfs
> Loading R4000 MMU routines.
> CPU revision is: 00002321
> Primary instruction cache 32kb, linesize 32 bytes.
> Primary data cache 32kb, linesize 32 bytes.
> Linux version 2.4.18 (atifa@posix) (gcc version 3.0.3) #354 Wed Oct 30 
> 21:48:33 IST 2002
> Determined physical RAM map:
>  memory: 04000000 @ 00000000 (usable)
> On node 0 totalpages: 16384
> zone(0): 4096 pages.
> zone(1): 12288 pages.
> zone(2): 0 pages.
> Kernel command line: root=nfs 
> Calling serial console init
> After parse options time_init intialization
> After trap_init intialization
> IN init_IRQ
> CPU_IRQ_BASE: 32
> enabling 8259 cascade
> After init_IRQ intialization
> After sched_init intialization
> After softirq_init intialization
> Calibrating delay loop... 199.47 BogoMIPS
> Memory: 62316k/65536k available (1331k kernel code, 3220k reserved, 77k data, 
> 196k init)
> Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
> Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
> Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
> Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
> Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
> Checking for 'wait' instruction...  available.
> POSIX conformance testing by UNIFIX
> PCI Autoconfig: Found Bus 0, Device 0, Function 0
> PCI Autoconfig: Found Bus 0, Device 1, Function 0
> PCI Autoconfig: BAR 0, I/O, size=0x80, address=0x1000
> PCI Autoconfig: BAR 1, Mem, size=0x80, address=0x8100000
> PCI Autoconfig: Found Bus 0, Device 3, Function 0
> PCI Autoconfig: BAR 0, Mem, size=0x1000, address=0x8101000
> PCI Autoconfig: BAR 1, I/O, size=0x20, address=0x1080
> PCI Autoconfig: BAR 2, Mem, size=0x100000, address=0x8200000
> PCI Autoconfig: Found Bus 0, Device 10, Function 0
> PCI Autoconfig: BAR 0, I/O, size=0x40, address=0x10c0
> PCI Autoconfig: BAR 1, I/O, size=0x20, address=0x1100
> PCI Autoconfig: Found Bus 0, Device 13, Function 0
> PCI Autoconfig: BAR 0, Mem, size=0x1000, address=0x8300000
> Scanning bus 00
> 
> calling pci_name_device PCI device 10b9:1533
> PCI device 10b9:1533Acer Laboratories Inc. [ALi] M1533 PCI to ISA Bridge 
> [Aladdin IV]
> calling pci_name_device PCI device 1011:0009
> PCI device 1011:0009Digital Equipment Corporation DECchip 21140 [FasterNet]
> calling pci_name_device PCI device 8086:1229
> PCI device 8086:1229Intel Corp. 82557 [Ethernet Pro 100]
> calling pci_name_device PCI device 10b9:7101
> PCI device 10b9:7101Acer Laboratories Inc. [ALi] M7101 PMU
> calling pci_name_device PCI device 10b9:5237
> PCI device 10b9:5237Acer Laboratories Inc. [ALi] M5237 USBFixups for bus 00
> irq_map[0]: 1c
> irq_map[1]: 18
> irq_map[3]: 19
> irq_map[10]: 1c
> irq_map[13]: 1c
> Linux NET4.0 for Linux 2.4
> Based upon Swansea University Computer Society NET3.039
> Initializing RT netlink socket
> Starting kswapd
> devfs: v1.10 (20020120) Richard Gooch (rgooch@atnf.csiro.au)
> devfs: boot_options: 0x0
> *******rs_init called 
> Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI 
> enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> ttyS01 at 0x02f8 (irq = 3) is a 16550A
> block: 128 slots per queue, batch=32
> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
> eepro100.c:v1.09j-t 9/29/99 Donald Becker 
> http://www.scyld.com/network/eepro100.html
> eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin 
> <saw@saw.sw.com.sg> and others
> status i pci_find_capability 640 device hdr type 0
> status i pci_find_capability 640 device hdr type 0
> set pwer state=-5 
> tx_ring_dma=11b8000
> eth0: Intel Corp. 82557 [Ethernet Pro 100], 00:A0:C9:6B:32:7D, IRQ 25.
>   Receiver lock-up bug exists -- enabling work-around.
>   Board assembly 678400-001, Physical connectors present: RJ45
>   Primary interface chip i82555 PHY #1.
>   General self-test: passed.
>   Serial sub-system self-test: passed.
>   Internal registers self-test: passed.
>   ROM checksum self-test: passed (0x49caa8d6).
>   Receiver lock-up workaround activated.
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP, IGMP
> IP: routing cache hash table of 512 buckets, 4Kbytes
> TCP: Hash tables configured (established 4096 bind 8192)
> **IN ip auto config
> **in ic_dynamic
> Sending BOOTP requests . OK
> IP-Config: Got BOOTP answer from 192.168.1.192, my address is 192.168.1.161
> IP-Config: Complete:
>       device=eth0, addr=192.168.1.161, mask=255.255.255.0, gw=255.255.255.255,
>      host=iddb-5074, domain=, nis-domain=(none),
>      bootserver=192.168.1.192, rootserver=192.168.1.192, 
> rootpath=/tftpboot/iddb-5074
> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> In nfs_root_data
> Looking up port of RPC 100003/2 on 192.168.1.192
> Looking up port of RPC 100005/1 on 192.168.1.192
> VFS: Mounted root (nfs filesystem).
> In init
> Freeing unused kernel memory: 196k freed
> 
> a0020000: heap is already above this poinô
> PMON version 0.0.365 [DDB-VRC4374,EL,NET]
> NEC Electronics,  Sun Dec 20 15:55:12 PST 1998
> This is free software, and comes with ABSOLUTELY NO WARRANTY,
> you are welcome to redistribute it without restriction.
> CPU type R5000.  Rev 2.1.  133 MHz.
> Memory size 64 MBytes.
> Icache size 32 Kbytes, 32 bytes/line.
> Dcache size 32 Kbytes, 32 bytes/line.
> User Space from 0xa005c7b8 to 0xa4000000 
> 
> 
> PMON> 

<Prev in Thread] Current Thread [Next in Thread>