linux-mips
[Top] [All Lists]

Re: PCI Graphics/Video Card for Malta Board?

To: Geert Uytterhoeven <geert@linux-m68k.org>
Subject: Re: PCI Graphics/Video Card for Malta Board?
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: 29 May 2002 13:49:58 +0100
Cc: Dan Malek <dan@embeddededge.com>, "Kevin D. Kissell" <kevink@mips.com>, Jun Sun <jsun@mvista.com>, "Steven J. Hill" <sjhill@realitydiluted.com>, Linux/MIPS Development <linux-mips@oss.sgi.com>
In-reply-to: <Pine.GSO.4.21.0205291014450.2890-100000@vervain.sonytel.be>
References: <Pine.GSO.4.21.0205291014450.2890-100000@vervain.sonytel.be>
Sender: owner-linux-mips@oss.sgi.com
On Wed, 2002-05-29 at 09:17, Geert Uytterhoeven wrote:
> On 29 May 2002, Alan Cox wrote:
> > Old S3 cards are very easy to configure. 3Dfx Voodoo 2 is great as we

> Of course I'm part of the problem myself, since I never got anything out of 
> the
> Vision968 and Trio64V+ in my PPC box. Except by emulating the BIOS code and
> using vga16fb...

I've had no problem with Russell King's ARM code. And for the 3dfx
voodoo2 (UKP 9 off ebay) none at all. The voodoo seems to have always
been designed to be totally soft configured and as its not a primary
video card the bios/firmware all leaves it alone


<Prev in Thread] Current Thread [Next in Thread>