On Fri, Feb 08, 2002 at 05:10:51PM -0500, Daniel Jacobowitz wrote:
> On Fri, Feb 08, 2002 at 10:58:51PM +0100, Florian Lohoff wrote:
> > 0x88166b58 <probe_scache+188>: mtc0 zero,gp
> > 0x88166b5c <probe_scache+192>: nop
> > 0x88166b60 <probe_scache+196>: mtc0 zero,sp
> > 0x88166b64 <probe_scache+200>: nop
> > mtc0/mfc0 do not address cpu registers but CP0 registers. The decoding
> > as "gp" or "sp" is not correct. These are "TagLo" and "TagHi".
> - what version of GDB?
> - does objdump do the same thing?
reset:~# gdb --version
GNU gdb 5.1
Copyright 2001 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "mips-linux".
reset:~# dpkg -l gdb
|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
||/ Name Version Description
ii gdb 5.1-1 The GNU Debugger
Objdump does seem to get this right:
88166b58: 4080e000 mtc0 zero,$28
88166b60: 4080e800 mtc0 zero,$29
Florian Lohoff firstname.lastname@example.org +49-5201-669912
Nine nineth on september the 9th Welcome to the new billenium
Description: PGP signature