linux-mips
[Top] [All Lists]

Re: usb-problems with Au1000

To: linux-mips <linux-mips@oss.sgi.com>
Subject: Re: usb-problems with Au1000
From: Wolfgang Heidrich <wolfgang.heidrich@esk.fhg.de>
Date: Thu, 10 Jan 2002 19:48:16 +0100
Cc: Pete Popov <ppopov@mvista.com>
Organization: FhG - ESK
References: <3B7DA3A3.8010000@pacbell.net> <3C3DD208.45B5BC29@esk.fhg.de> <1010684946.29315.82.camel@zeus>
Sender: owner-linux-mips@oss.sgi.com
Hello Pete,

Pete Popov wrote:
> 
> On Thu, 2002-01-10 at 09:40, Wolfgang Heidrich wrote:
> > Hello,
> >

> > During booting the kernel initalizes the usb-device-driver and
> > a little later prints "USB device not accepting new address...":
> 
> Which LSP version do you have? Do an "rpm -qa | grep hhl- | grep lsp".

hhl-cross-mips_fp_le-lsp-mips-malta-2.4.2_hhl20-hhl2.0.2
hhl-cross-mips_fp_le-lsp-alchemy-pb1000-2.4.2_hhl20-hhl2.0.2

> 
> There was a hardware errata in the usb controller, but a software fix is
> already in the kernel (assuming you have a late enough kernel).  Also,
> the usb switches, S4, should be set to:
> 
> 1-4 off
> 5-6 on
> 7-8 off

I used these settings. But as far as I know these settings are only
relevant for the second USB.

Thanks in advance
-- 
Wolfgang

<Prev in Thread] Current Thread [Next in Thread>