On Wed, Oct 24, 2001 at 08:23:00PM -0400, nick@snowman.net wrote:
> Getting it running 64bit shouldn't be *too* bad, however there are some
> revs of some chips on the MB which linux currently can't deal with, and
> noone is quite sure 1. what revs, 2. why, or 3. anything
> usefull. <Grin>. Could you send a hinv -v from the prom? Boot logs would
> also be usefull (so I can tell if we are haveing the exact same problem,
> or just similar ones)
>> hinv -v
IP27 Node Board, Module 1, Slot MotherBoard
ASIC HUB Rev 3, 90 MHz, (nasid 0)
Processor A: 180 MHz R10000, Rev 2.6, 1M 120MHz secondary cache, (cpu 0)
R10000FPC Rev 0
Memory on board, 64 MBytes (Standard)
Bank 0, 64 MBytes (Standard) <-- (Physical Bank 0)
BASEIO Origin 200 IO Board, Module 1, Slot MotherBoard
ASIC BRIDGE Rev 3, (widget 8)
adapter PCI-SCSI Rev 4, (pci id 0)
peripheral SCSI DISK, ID 1, SGI IBM DORS-32160W
adapter PCI-SCSI Rev 4, (pci id 1)
peripheral SCSI CDROM, ID 6, TOSHIBA CD-ROM XM-5401TA
adapter IOC3 Rev 1, (pci id 2)
controller multi function SuperIO
controller Ethernet Rev 1
adapter PCI-SCSI Rev 5, (pci id 5)
--
Lukáš Hejtmánek
|