linux-mips
[Top] [All Lists]

Re: Strange behavior of serial console under 2.4.9

To: "H . J . Lu" <hjl@lucon.org>
Subject: Re: Strange behavior of serial console under 2.4.9
From: "Bradley D. LaRonde" <brad@ltc.com>
Date: Fri, 19 Oct 2001 09:54:35 -0400
Cc: <linux-mips@oss.sgi.com>, "Maciej W. Rozycki" <macro@ds2.pg.gda.pl>
References: <Pine.GSO.3.96.1011019152309.1657F-100000@delta.ds2.pg.gda.pl>
Sender: owner-linux-mips@oss.sgi.com
H.J., which serial driver are you using?

Regards,
Brad

----- Original Message ----- 
From: "Maciej W. Rozycki" <macro@ds2.pg.gda.pl>
To: "H . J . Lu" <hjl@lucon.org>
Cc: <linux-mips@oss.sgi.com>
Sent: Friday, October 19, 2001 9:26 AM
Subject: Re: Strange behavior of serial console under 2.4.9


> On Thu, 18 Oct 2001, H . J . Lu wrote:
> 
> > I am using 9600 buad. It used to be ok under 2.4.3/2.4.5. But under
> > 2.4.9, the first 10 minutes after boot is very slow. After that, it
> > seems ok.
> 
>  That might be driver-specific.  I'm using drivers/tc/zs.c and it works
> fine at 115200 bps.
> 
> -- 
> +  Maciej W. Rozycki, Technical University of Gdansk, Poland   +
> +--------------------------------------------------------------+
> +        e-mail: macro@ds2.pg.gda.pl, PGP key available        +
> 


<Prev in Thread] Current Thread [Next in Thread>