I have installed your new set of RedHat7.1 RPMs, and tried to build Perl
natively.
But it fails with the following message:
`sh cflags libperl.a toke.o` toke.c
CCCMD = gcc -DPERL_CORE -c -fno-strict-aliasing
-I/usr/local/include
-O2
Cannot allocate 2676168 bytes after allocating 3899765696 bytes
make: *** [toke.o] Error 1
error: Bad exit status from /var/tmp/rpm-tmp.43439 (%build)
RPM build errors:
Bad exit status from /var/tmp/rpm-tmp.43439 (%build)
I have build perl natively with your pervious set of RedHat7.1 RPMs,
without any problems.
/Carsten
"H . J . Lu" wrote:
> I updated a few packages, fixed a linker bug and rebuilt everything.
>
> H.J.
> ----
> My mini-port of RedHat 7.1 is at
>
> ftp://oss.sgi.com/pub/linux/mips/redhat/7.1/
>
> you should be able to put a small RedHat 7.1 on the mips/mipsel box and
> compile the rest of RedHat 7.1 yourselves.
>
> Here are something you should know:
>
> 1. The cross compiler hosted on RedHat 7.1/ia32 is provided as a
> toolchain rpm. The binary rpms for the mips and mipsel cross compilers
> are included. You will need glibc 2.2.3-11 or above to use those
> rpms. The glibc x86 binary rpms under RPMS/i386 should be ok.
> 2. You have to find a way to put those rpms on your machine. I use
> network boot and NFS root to do it.
> 3. install.tar.bz2 has some scripts to prepare NFS root and install
> RedHat 7.1 on a hard drive.
> 4. baseline.tar.bz2 contains the cross build tree.
>
> Thanks.
>
> H.J.
--
_ _ ____ ___ Carsten Langgaard Mailto:carstenl@mips.com
|\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527
| \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555
TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556
Denmark http://www.mips.com
|