Re: SGI O2 Port

To:	Keith M Wesolowski <wesolows@foobazco.org>
Subject:	Re: SGI O2 Port
From:	Ralf Baechle <ralf@oss.sgi.com>
Date:	Mon, 14 May 2001 17:54:55 -0300
Cc:	Rafal Boni <rafal.boni@eDial.com>, linux-mips@oss.sgi.com
In-reply-to:	<20010514081039.B18935@foobazco.org>; from wesolows@foobazco.org on Mon, May 14, 2001 at 08:10:39AM -0700
References:	<20010512185211.C3092@foobazco.org> <200105141204.IAA19260@ninigret.metatel.office> <20010514081039.B18935@foobazco.org>
Sender:	owner-linux-mips@oss.sgi.com
User-agent:	Mutt/1.2.5i

On Mon, May 14, 2001 at 08:10:39AM -0700, Keith M Wesolowski wrote:

> > What CPU's are supported currently?  Just the R5000, or are the R10k/R12k
> > supported as well?  (I realize that the latter two are harder to support,
> > but thought I'd ask nevertheless).
> 
> I have never built it for anything but r5k.  It's very likely that
> 52x0 will also run fine.  In theory r10k/r12k should work.  In
> practice, however, I suspect that differences in the crime controllers
> will make it impossible to boot; I can probably fix that.  As we run
> uncached only at this time anyway, the spec writes thing should not be
> an issue.

Only an issue for R10k; R12k and beyond are sane in that respect.

  Ralf

<Prev in Thread]	Current Thread	[Next in Thread>
SGI O2 Port, Keith M Wesolowski Re: SGI O2 Port, Rafal Boni Re: SGI O2 Port, Keith M Wesolowski Re: SGI O2 Port, Ralf Baechle <=

Previous by Date:	Mips cross-compiler, Jason Brock
Next by Date:	Re: backwards compatible ld.so patch, Ralf Baechle
Previous by Thread:	Re: SGI O2 Port, Keith M Wesolowski
Next by Thread:	Tuxfinder, Karel van Houten
Indexes:	[Date] [Thread] [Top] [All Lists]