What Error's are you getting?
----- Original Message -----
From: "Phil Thompson" <Phil.Thompson@pace.co.uk>
Sent: Wednesday, March 21, 2001 9:00 AM
Subject: RE: Recommended toolchain
> So, going back to the original question, what are the recommended
> particularly if you are building 2.4.x kernels?
> Are the recomendations in the HOWTO out of date? I had to patch va-mips.h
> from the egcs RPM and more fixes seem to be needed before I get a kernel
> that compiles.
> -----Original Message-----
> From: Ralf Baechle [mailto:firstname.lastname@example.org]
> Sent: 20 March 2001 20:37
> To: Karel van Houten
> Cc: email@example.com; firstname.lastname@example.org
> Subject: Re: Recommended toolchain
> On Tue, Mar 20, 2001 at 09:12:02PM +0100, Karel van Houten wrote:
> > You wrote:
> > > Recently I've been working with various version mixes of the gnu tool
> > > chain for a mipsel-linux target and settled on a patchy binutils
> > > 2.8.1/egcs 1.1.2/glibc 2.0.6 setup. However this lacks the
> > > that I would get from a newer toolchain for use with the linux 2.4
> > > kernel. As a result, I was wondering if someone could recommend the
> > > latest "stable"/recommended toolchain for a mipsel-linux target.
> > Well, I'm currently using:
> > binutils 2.10.1
> > gcc 2.95.3 (with Maciej's patches)
> > glibc 2.2.2 (compiled with above toolchain).
> > This toolchain works for native compiles on my mipsel box.
> > One drawback: I can't compile any kernels with this setup,
> > For kernel compiles I use 2.8.1/egcs-2.90.27/glibc-2.0.6.
> You MUST use minimum egcs-2.91.66 (1.1.2); older compilers WILL