Lisa.Hsu@taec.toshiba.com wrote:
>
> Thanks to Henning for showing me where to get the big-endian compiled
> packages and it works. Now, I need big-endian compiled "ash".
> Is anybody know where I can get it?
>
> Thanks,
>
> Lisa
>
>
> heinold@physik.tu-
> cottbus.de To: linux-mips@oss.sgi.com
> (H.Heinold) cc:
> Sent by: Subject: Re: NFSROOT
> filesystem
> owner-linux-mips@o
> ss.sgi.com
>
>
> 03/01/01 01:24 AM
>
>
>
> On Wed, Feb 28, 2001 at 07:00:13PM -0800, Lisa.Hsu@taec.toshiba.com wrote:
> >
> > Hi, All
> >
> > For using NFS boot, I've already edited the /etc/hosts, /etc/exports to
> add
> > the entry for my target board. The command line that I use in our EPROM
> > based bootloader is as follows:
> >
> > root=/dev/nfs rw ip=::::::rarp console=ttyS2
> > nfsroot=209.243.136.151:/work/nfsroot
> >
> > I need to setup the NFSROOT filesystem on the server for my target board
> > (which is running in Big-endian mode), what are the steps that I have to
> > do?
> >
> For big endian you need big endian complied packages, you can retrieve the
> debian base2_2.2.tgz
> under ftp.uni-mainz.de/pub/Linux/debian-local/mips, which should work fine
> as nfsroot. I have some
> problems with open a console beacause on Indigo2 you only have output on
> the serial console.
>
> > There is a FTP site for getting RPM packages for little endian mode:
> >
> >
> tp://ftp.linux.sgi.com/[ig/linux/mips/mipsel-linux/RedHat-6.1/RPMS
> >
> > I could not find similar one for big-endian. Can anybody give me a
> > pointer to where the RPM packages reside on the web?
> >
> >
> > Thanks,
> >
> No prob.
>
> > Lisa
> >
> >
> >
Lisa,
You can get either big endian or little endian NFS root fs on the following
site.
ftp://ftp.mvista.com/pub/Area51/mips_fp_le
ftp://ftp.mvista.com/pub/Area51/mips_fp_be
Jun
|