linux-mips
[Top] [All Lists]

Re: will this work in an Indy?

To: tmaloney@ixl.com
Subject: Re: will this work in an Indy?
From: Florian Lohoff <flo@rfc822.org>
Date: Fri, 10 Nov 2000 10:12:06 +0100
Cc: linux-mips@oss.sgi.com
In-reply-to: <0A5319EEAF65D411825E00805FBBD8A1209CA3@exchange.clt.ixl.com>; from tmaloney@ixl.com on Thu, Nov 09, 2000 at 01:15:48PM -0500
Organization: rfc822 - pure communication
References: <0A5319EEAF65D411825E00805FBBD8A1209CA3@exchange.clt.ixl.com>
Sender: owner-linux-mips@oss.sgi.com
User-agent: Mutt/1.0.1i
On Thu, Nov 09, 2000 at 01:15:48PM -0500, tmaloney@ixl.com wrote:
> Internal Transfer Rate (mbits/sec) 44 - 65 External Transfer Rate
> (mbits/sec) 10 (burst) Spindle Speed (RPM) 5,400 Average Latency (msec) 5.55
> Buffer 1024 Kbyte Interface 50 Pin SCSI-2 FAST Bytes Per Track (avg)
> 42,000-55,440 TPI (Tracks Per Inch) 2,250 Average Access (ms read/write)
> 11/12 Single Track Seek (ms) 0.9/1.7 Max Full Seek (ms) 23/24
> Height: 3.25 in / 82.6 mm Width: 5.75 in / 146.1 mm Depth: 8.0 in / 203 mm
> Weight: 7.8lb / 3.6 kg 
> 
> 

I am getting a bit annoyed by the "Will this work in ..." - This is definitly
not something which should be discusses in here (Although small amounts
of Off-Topic mails will be tolerated) ...

Flo
-- 
Florian Lohoff                  flo@rfc822.org             +49-5201-669912
     Why is it called "common sense" when nobody seems to have any?


<Prev in Thread] Current Thread [Next in Thread>