linux-mips
[Top] [All Lists]

Re: sgiserial.c

To: Linux on MIPS <linux-mips@oss.sgi.com>
Subject: Re: sgiserial.c
From: Marcus Herbert <rhoenie@spam-filter.de>
Date: Tue, 10 Oct 2000 05:13:48 +0200
In-reply-to: <39E22B5A.66587B5A@ridgerun.com>; from gmcnutt@ridgerun.com on Mon, Oct 09, 2000 at 02:32:26PM -0600
Mail-followup-to: Marcus Herbert <rhoenie@spam-filter.de>, Linux on MIPS <linux-mips@oss.sgi.com>
References: <39E22B5A.66587B5A@ridgerun.com>
Sender: owner-linux-mips@oss.sgi.com
User-agent: Mutt/1.2.2i
On Mon, Oct 09, 2000 at 02:32:26PM -0600, Gordon McNutt wrote:
> I'm trying to get the Indy's serial port to drive a peripheral card at
> 115200 baud. It appears to work OK at 9600 baud (the serial port that is
> -- the card expects 115200 baud).

It is limited to 38400 bit/second on hardware side. Read IRIX serial 
manpage:

[..]
SUPPORTED SPEEDS
     The serial ports of all SGI systems support several standard rates
     up through 38400 bps (see termio(7) for these standard rates).
     The serial ports on O2, OCTANE, Origin2000, Onyx2 and Origin200
     systems also support
     
                                31250   57600
                                76800   115200
[..]

This is common knowlegde btw ;-)

-- 
      PGP2 Key-ID: 666/36540865 1997/06/09 <rhoenie@spam-filter.de>
       GPG Key-ID: 1024D/2E2DAB44 2000-01-30 <rhoenie@spam-filter.de>
        Geek-Code: GCS b O e+ h

<Prev in Thread] Current Thread [Next in Thread>